Home Forums Bike Forum Enduro 650b Cane Creek Settings

Viewing 9 posts - 1 through 9 (of 9 total)
  • Enduro 650b Cane Creek Settings
  • rickon
    Free Member

    Hi chaps

    What settings are owners of Specialized Enduro 650b running?

    I’ve had a session of dialling mine in, but still not quite right.

    What settings are others using?

    Cheers

    Ricks

    tomhoward
    Full Member

    What don’t you like?

    lardman
    Free Member

    coil, or air?
    i have a coil on my 26 Enduro, went with standard suggested settings and it works pretty darn well.

    chiefgrooveguru
    Full Member

    Have you gone through the field tuning guide?

    rickon
    Free Member

    Yep, been through the guide. It feels a little bit harsh, I’ve back off the high speed rebound and the high speed compression further.

    rickon
    Free Member

    It a DB Inline too

    andrewni
    Free Member

    Standard except a couple of extra clicks of hsc and slightly less sag than recommended (I think it should be 18mm and I have it around 16) – livens the bike up a bit

    chiefgrooveguru
    Full Member

    Try adding a volume spacer, that’ll mean you can run less HSC and you’ll get quicker rebound deep in the travel with the same HSR setting so it won’t pack down as much.

    rickon
    Free Member

    Booom! Awesome. I’ll give it a go.

Viewing 9 posts - 1 through 9 (of 9 total)

The topic ‘Enduro 650b Cane Creek Settings’ is closed to new replies.