Home Forums Bike Forum twenty four seven bikes – why did they go under?

Viewing 29 posts - 1 through 29 (of 29 total)
  • twenty four seven bikes – why did they go under?
  • trumpton
    Free Member

    Anyone know? By the consistent amount second hand on ebay they shifted a fair few bikes?

    transporter13
    Free Member

    Pretty sure leisure lakes bought them up at some point… I remember them stocking them when they were in their old shop in daventry

    trumpton
    Free Member

    yeah leisure lakes sold off all their stock. Guess they’d run their course.

    trail_rat
    Free Member

    I’m struggling to think of a single decent product they sold.

    I had their dark angel bar and stem and some of their 3 piece cranks.

    Both weighed more than the sun and moon combined.

    trumpton
    Free Member

    I’ve got their dh bike. Love it and keeping it. Weighs a ton though about 45 lbs at a guess. Steel front, alloy rear. and rides well and is pretty slack. The crank is super well built. Their jump bikes are great for their age too.

    trail_rat
    Free Member

    The cranks I had -all three attempts weren’t welded straight.

    The DH bike was brought out just as dh riders woke up and realised that weight was still highly important to downhill performance Wrong place wrong time for that to be released even if it was ludacrously cheap. It rode reasonably well but even when new it was a pig weight.

    Yes your right they did make a complete dj3 equipped jump bike that was a bargain and rode really well.

    squirrelking
    Free Member

    I had their dark angel bar and stem and some of their 3 piece cranks.

    Both weighed more than the sun and moon combined.

    Really? I genuinely never saw you in that segment.

    Those bars were hilariously heavy though, I had them on my Timberline, Bommer and Le Toy till Gaz had that deal on cheap Pro-Tapers. What a revelation they were.

    trail_rat
    Free Member

    They were on my trailstar.

    I ended up with gusset pygmys on it far made product.

    The 24/7s in hindsight were just 4jeri junk with some fancy etching in the chrome.

    Nothing with 8spline /pinch bolt axles was ever going to run true.

    Ended up replacing bars with some azonic doublewalls ….they had a decent shape about them. The dark angels were pretty much a straight piece of gas pipe bent into a riser shape. Little or no sweep iirc

    But like most of their stuff. Cheap.

    On one probably beat them in the race to the bottom.

    robo89
    Free Member

    Ive got one of their dark grey 40mm stems with the 24 machined out in silver, use as a paper weight its that hefty.

    trumpton
    Free Member

    I sold the original unused bars and stem on ebay about 1 year ago. Were not that heavy and went easily.

    trail_rat
    Free Member

    It is amazing what folk on eBay will buy.

    Pretty sure I managed to sell/ give away all my 24/7 stuff too

    squirrelking
    Free Member

    I presume you mean the bendy ones and not the welded steel ones?

    trail_rat
    Free Member

    24/7 slacker was the jump bike they made that was pretty darn good for 700 quid

    johnnystorm
    Full Member

    This is what Fraser, the chap behind 24/7, went on to do and is up to now…

    Meet your maker: BiViBIKES

    transporter13
    Free Member

    Only decent part I remember was their dark angel frames.. The rest were shit
    Crank arms… Bent about 5 of them
    Axles.. Twisted a few of those too
    Those god awful scaffold bars
    Actually their little dj stem was OK as well

    trumpton
    Free Member

    good stuff.

    kayak23
    Full Member

    Was talking about this just the other day weirdly.

    Their downhill bike was one of the first proper bikes i bought, from Leisure Lakes in Daventry as it happens.

    Absolute beast of a bike. Weighed as much as a small family hatchback. Cost me 1k and had some ok stuff on it that I eventually took onto other bikes.

    They were more successful in the dirt jump world.

    submarined
    Free Member

    Their dirt jump stuff was great.
    Had some bars that just felt ‘right’, a stem, and a mate had a DJ frame (DarkAngel?) that he loved and certainly didn’t hold back on. I had a hoodie that was one of my favourite ever ones as well 😀

    colournoise
    Full Member

    I remember really wanting 24/7 stuff BITD. To my inexperienced MTB eye back then they seemed like affordable Spooky stuff.

    Still running some of those cranks on my pub bike. Must have been one of the lucky ones who got a straight set. Strong as, and the truly cosmic weight really helps lower the CoG of the bike!

    trail_rat
    Free Member

    Those are supafats are they not. (Loads of fine splines on a taper)

    Basically gusett pygmys.

    Probably go fed up of warrentyjng the dark angels (8splines and a pinch bolt)

    Also remembered where my bars went…. The slowely bend downwards on the ends. So that’s why k swapped. Azonic shorty and double wides.

    I gave the stem to trailstar off here for his BMX

    Still got the MRP world cup type 1 that came with the crank bundle.

    andeh
    Full Member

    Pretty sure I’ve still got the bar/stem combo kicking about in my mum’s shed, just waiting for the right bike to come along 😛

    colournoise
    Full Member

    trail_rat
    Those are supafats are they not. (Loads of fine splines on a taper)

    Quite right. Didn’t realise there were others.

    sani2c
    Free Member

    Restricted opening hours?

    beer247
    Free Member

    I had the original v1 Darkangel Frame.

    Had two holes for the canti mounts so you could run 24”/26” wheels. I’m sure I saw someone running one with 24” rear, 26” front – the original mullet bike?

    I bought mine from Leisure Lakes Bury – it had RSTs forks with the worst top out ever, a long cage road mech installed and no retention on the single chainring!

    And it did have the weird scaffold bars!

    trumpton
    Free Member

    I think LL just bolted leftover parts on them. Mine has Coil domains on the front and a dhx5 air rear shock. thanks for the photos. Looks like mine kayak. Love it. Fun to ride and thunders downhill.

    squirrelking
    Free Member

    Original mullet bike was the Spec Bighit.

    Is Trailstar on here? Never seen him on a forum since DW.

    trail_rat
    Free Member

    The original stock mullet bike.

    Many people were throwing 24 inch back wheels at bikes before that for strength …

    But again -another thing we realised was a bad idea before 24/7 decided to release it.

    There’s a good review on ride.io..(by orge -who could handle a bike….and was no snob….his own bike iirc was pretty much barely holding together) . says yeah it’s cheap but the suspension doesn’t really work….yes it’ll move when you chuck it into a rock garden but it’s not tracking the ground.

    24 inch rear wheels on downhill bikes were great at hooking up. -brake jack on steroids.

    Nah trailstars not on hereno more. He made a brief appearance.mostly Runs and road rides now. Has 3 kids and a high flying job. Hear from him now and again he’s keeping well.

    geex
    Free Member

    It’s genuinely funny that you’re quoting this when you spent money on an ST-10

    *I actually liked some ST-10s.
    and loved Tom’s no **** given attitude

    trail_rat
    Free Member

    No one ever claimed the st10 to have amazing suspension action. And even less that it has a good action in 2019.

    It also had proper size wheels

Viewing 29 posts - 1 through 29 (of 29 total)

The topic ‘twenty four seven bikes – why did they go under?’ is closed to new replies.