Home Forums Bike Forum Raceface Turbine cranks- can I use a Shimano HT2 BB?

Viewing 14 posts - 1 through 14 (of 14 total)
  • Raceface Turbine cranks- can I use a Shimano HT2 BB?
  • IHN
    Full Member

    Yep

    mindmap3
    Free Member

    Yup – I tend to because the stock RF BB’s that come with the cranks can be touch and go (although my after market one is holding up well).

    Deore BB’s are poop though – pay the extra few quid for an XT one.

    hora
    Free Member

    Thanks – is it a good crankset? I’ve always had Shimano and never used another really.

    mindmap3
    Free Member

    The Turbine stuff is really nice.

    I always use Race Face cranks and have had no issues with them – my Rune and Stanton both run Atlas AM cranks which are standing up well. The Turbine stuff is a bit lighter but will still take a battering.

    If they weren’t grey, I think I’d be buying a pair to replace my most battered Atlas cranks.

    nickc
    Full Member

    Bear in mind the Outer chainring is 120BCD which does restrict the choice of ring you can get on there.

    hora
    Free Member

    Bear in mind the Outer chainring is 120BCD which does restrict the choice of ring you can get on there.

    As I’ve just found out this morning as I opened up and placed my narrow wide chainring against the apertures… 😕

    I’ve had 3xShimano for the last ten years so not really had this issue. Ah well, it is a very beatiful crankset/nice BB though (RF BB came inc- didn’t expect one).

    Back it goes.

    tomglass20
    Free Member

    So would these cranks except a hope NW 34t ring ?

    hora
    Free Member
    mikewsmith
    Free Member

    hora – Member

    Bear in mind the Outer chainring is 120BCD which does restrict the choice of ring you can get on there.

    As I’ve just found out this morning as I opened up and placed my narrow wide chainring against the apertures… [/quote]

    Research?

    Gee76
    Free Member

    Blackspire have (had) one to fit 80bcd in the pipeline but has been overdue for sometime now.. still waiting on mine!!

    hora
    Free Member

    Research?

    Ever pulled a fit bird, bundled into bed then realised shes a bit shit?

    I was too excited and ‘buy’ too soon..

    mindmap3
    Free Member

    I didn’t even know that this silly BCD existed!

    They’ve been 104 for ages why deviate? I can understand SRAM going to 90 for the 11 speed groupsets.

    Gee76
    Free Member

    Good News, don;t send them cranks back just yet…

    Just got an email from Charlie, direct at Blackspire and he indicated about 10 days and the 80bcd version will be sent to CRC, wohoo! :)…

    Shown here….

    http://www.chainreactioncycles.com/blackspire-mono-veloce-narrow-wide-chainring/rp-prod112084;jsessionid=A4B2362EB92F7A6FFA48A83DD3FD27B1.crc-app-01-p-app1

Viewing 14 posts - 1 through 14 (of 14 total)

The topic ‘Raceface Turbine cranks- can I use a Shimano HT2 BB?’ is closed to new replies.