Prophet Pivot bearings – what size are they

Anyone know so i don’t need to take my bike apart!! cheers

bump

and again

swing arm bearings 6902

ta – 2rs i presume? Getting a new swing arm – will it come with bearings fitted?

Ask your lbs

is it open – is i ****!

rs is right good luck with swing arm fitting it yourself?

aye – easy enough

pppppp

racing_ralph – Member
is it open – is i ****!

proper proir planning prevents p155 poor performance

you did start this post 2 days ago

the swing arm arrives in 3 weeks! POYPT

15 x 28 x 7’s

Try EBR Bearing Supplies on fleabay

thanks dusty

http://www.ebrbearings.co.uk/index.php?act=viewProd&productId=158

these puppies?

They’re the ones. I use a big bolt, some washers and a big socket to fit them. So, big socket on outside of swingarm (bit of tape on there to protect), big washer to stop bolt pulling into socket, press bearing in by hand as square as possible as far as you can, then washer just smaller than bearing o/d – about 26mm – then the nut and carefully tighten. Did that make sense?

A big G-clamp may do it too with care.

i have a metal work vice and a bearing ress so should be ok 🙂 cheers matey

Very semi-pro 😉

are SKF bearings worth £7 each more?

SKF are standard C/dale fitment, strange that the PDF manual for the Gemini lists the size and manufacturer, but there’s no reference to the bearings in the Prophet one other than the C/dale part no.

SKF are premium quality bearings I believe.

SKF it is then 🙂

Because you’re worth it…