Hope Vision 2 is upgradable

Big jim, any idea of the capacity of the cell.?
Actually send me an email and I’ll sort you a battery out to go inside it

Got my light back from Chris today, great upgrade.
Cheers again.

Mine arrived back in the post this morning on initial impression seems excellent, am looking forwards to my next night ride to try it properly

Thanks Troutie 🙂

smudge I’m not sure of the capacity, there are some letters printed on the casing but nothing that conveys much info. Exposure say they use Sanyo batteries but it has no name on it, though it is the right colour going by the sanyo 18650’s that come up in google image search. I’ll email you anyway.

Picked mine up from the sorting office today. I will try it at Plymbridge tonight with the original Dominator and a Magicshine XML. Look out for the reports of ball lightning on the lower moor.

OK Tonolina what’s the verdict does it pass muster?

Hi troutie, if you remember mine was the hope 4 you modded. It’s working great but the buttons come loose, is it safe to open the back to POP it back in? Also got a bigger battery, can I up the output?

Cheers

Mark

Wow I cant remember what I did to yours but glad its working still

yes do what ever is needed to secure the switch
Going to revisit the 4 as I have a cunning plan as to upgrading it
now new leds and drivers are available

Be very careful if you unscrew the front bezal as the optic could turn and rip off the led domes

I think it has a Maxflex so you could bump it to 1200 or 1300 ma if it is the one I think it is

cool

Athe moment the only way to turn it on and off is to plug/unplug the battery

Right stupid question day, how do I alter the maxflex?

a step by step idiot guide would be appreciated

cheers

Hi Chris, I am very frustrated at not yet being able to try out my light you sent back last week, work and other issues have prevented me from having a night ride. Will do so in the next couple of days, but as everyone has said, fantastic service from Mr. Trout and it is blinding (almost literally) indoors!

p.s. can I get early on the list for having a Hope 4 Trouted?

Trout – the upgrade is excellent. The Hope 2 casing was always my favourite looking light and now it outshines all the others. With the cheapy Magicshine on my helmet I can’t imagine needing anymore light. At least not until you post details of your Hope Vision 4 conversion.

Any offers for my old L & M HIDs or L & M Seca 700 as they just aren’t up to the job anymore.

Got to try mine out last night, excellent, a massive improvement over the original. Thanks Troutie

Could the Vision 2 be upgraded and also modified to use the AyUp battery pack?

(Got heaps of AyUp batteries and my Hope batteries have died)

First ride on my TroutVision2.

Before I got Trouted I had just bought a Hope R4, the TroutVision is at least as bright. Bring on the night 🙂

I need to get mine in the post.

Last night’s ride out of Clapham in sloppy slippy Yorkshire solicited admiring glances to the Trouted Hope2 and a direct comparison with a Hope2 Mk2 which it wee’d on from a very great height. As a result my mate is seriously considering the upgrade.

Apologies to five of you still waiting for your Troutie-Vision 2 to come back .
I am running a bit behind due to being very busy also laying floors

they will all be done this weekend and in the post on monday

Sorry for the delay

No worries fella, have a feeling my off-road commute’s going to get a whole lot faster next week!

Finally got to try the light out- fantastic. Spent about 50:50 between high and medium over nearly two hours and no sign of reducing light level when on high. Very happy- thanks Chris!!

Hope Vision 4 upgrade
I know this is Hope 2 thread but I couldn’t find one for the Vision 4 upgrade. I have 2008 model with rev 3 PCB and what I think are SSC P7. I’ve ordered some Cree XM-L T6 and a U2 from Cutter on a 10mm MPC. I’m pretty sure I can get this to work as straight swap with same current and optics with a increase of 960 lm to about 1500.

Does anyone have a schematic to share so I can look at boosting the current slightly? I’d want to check the series I sense resitor value and the FET etc ratings for safe operating area. I’ve got the Linear Tech v reg datasheet but any other knowledge gratefully received.

Hey troutie, have you had a chance to do any magic by cramming powerful things into the Joystick yet?

not yet as still waiting for drivers
the good news is he is back from walkobout in OZ and the order is being processed

Hi Mr Electric
any idea what current is going through the leds of the standard Hope .

I have just put my last Lflex driver in the hope 4 and about to test it in the woods
putting 1.5 amps in to 4 XMLs so about 2200 lupins in theory

sounds like new drivers on the way, may start getting excited to see what magic happens to my joystick now….

trout – any thoughts on how long a new battery will last with the new driver and LED?

Can I get on the vision 4 upgrade list? Quite fancy some more light from mine and a higher kelvin temp led as well.
Find it a bit yellow now.

Sorry for no replies been away on a fishing trip in Scotland .

Yep drivers ordered and paid for should be dispatched this week
also got some leds ordered for the hope 4s so should be cooking soon .
Though have a small backlog built up to clear first

Light received with thanks Troutie.

Still not had a chance to get out, but the ‘bedroom with the lights out test’ first impressions seem very good.

Thanks again.

Where’s the best place to get Xmls from now? I want to upgrade my homemade luxeon rebel star based light, and ultraleds seem to have dropped out of the market now.

Cheers

Chris, any idea on price for the Hope 4 conversion? Cheers Ian.

what you fishing for at this time of year troutie?

I can flog you a few I get mine from Cutters
or europe fairly quick sales http://www.led-tech.de/

Cooie not yet still thinking about what’s the best way to do it .

BigJim
sat was Skate fishing out of Oban or just a boat ride as we blanked .
Sunday was a whole load of species in Loch Etive had a real good day with lots of fish caught but no monsters. Was beaten by my Daughter who brought home a large coal-fish and a few nice whiting all I got for eating was a few good sized Mackerel

Good news for all you waiting for the Hope conversions
the Drivers left the good ol USofA yesterday so should be here soon.

Let us know if you have a breakthrough with the joystick! I’m not sure what to do with my borked one.

Trout
whithout spending lots of time searching this post, what are you charging for the hope 2 conversion ❓

Cheers

£70 and well worth it. Out for a blast tonight with mine!

troute, is one of the drivers bound for project joystick??

Camerone yep it is though also think it needs a fresh battery

will have to get a few in off smudge .

Thanks Pauly

My brother had his Hope 2 done and having done a few night rides recently can confirm Wow! outshines my Trout mini on all levels(marginally 😀 ) Seventy beer tokens well spent!

trout can you let me know whats the outcome with project joystick and have you had a look at the maxx d yet thanks

trout can you let me know whats the outcome with project joystick and have you had a look at the maxx d yet thanks

Yes will post up any results good or bad
the guy who was going to send the maxx d has not sent it yet
so not had a chance to look inside one yet