Fox Fork Remote to Manual Conversion (and a free remote).

Does anybody have any idea if it’s possible, recommended and if so, how do I change my fox 32 forks from remote (bar mounted two lever metal clicking monstrosity) CTD lever to one that is on the fork leg top?

I hate clutter and this thing is an eyesore. Free to anybody who wants it although you’ll have to hang on for the blue cap thing until I can get it swapped to manual and the tiny grub screw is missing – I’ll try to find it on the conservatory floor this evening, assuming it’s feasible.

Interested in this too.

Pop the 4 digit code in here to get the exact model/year

https://www.ridefox.com/fox17/help.php?m=bike

And you can get the part numbers and see how to remove/install in the service procedures.

Remote conversion procedure 14/15 32 CTD, so I guess you would do the opposite;

https://www.ridefox.com/fox17/help.php?m=bike&id=145

Hopefully you can just buy a top cap kit something like this;

If in doubt give Silverfish a ring and go through to Fox, its all the old Mojo people and they are super helpful.

That’s exactly what I was hoping for bigyan. Thank you very much.