Home › Forums › Bike Forum › Fitting a shimano crank arm to campag bb

Overview Chat Bike Members News Women
Viewing 8 posts - 1 through 8 (of 8 total)
  • Fitting a shimano crank arm to campag bb
  • soma_rich
    Free Member

    Is it possible to fit a Shimano square taper crank arm to a campag bb?

    Posted 12 years ago
    cynic-al
    Free Member

    I can’t remember which way round isn’t meant to work, tho I think I have seen both work!

    I think this way is OK. Someone may correct me

    Posted 12 years ago
    mattsccm
    Free Member

    It will go. Either way. Tapers don’t match but WTF. Dog it up tight and keep an eye on it. After a bit the steel BB shaft will make its own taper in an alloy crank.

    Posted 12 years ago
    soma_rich
    Free Member

    Mattsccm that’s what I thought. Thanks guys,!

    Posted 12 years ago
    DezB
    Free Member

    Have you found an arm rich?
    Just about to go and have a good dig in the garage 🙂

    Posted 12 years ago
    oldgit
    Free Member

    It goes but it’s not great. JIS and the other one.

    Posted 12 years ago
    DezB
    Free Member

    £25 on Ebay would sort it – http://www.ebay.co.uk/itm/Campagnolo-Centaur-chainset-/120972981037

    Posted 12 years ago
    slinkybike
    Free Member

    Campag is Iso shimano jis i have been trained not to mix the two as your likely to shagg the crank arms.

    Posted 12 years ago
Viewing 8 posts - 1 through 8 (of 8 total)

The topic ‘Fitting a shimano crank arm to campag bb’ is closed to new replies.

Overview Chat Bike Members News Women