Home Forums Bike Forum Tesco torch makes

Viewing 7 posts - 1 through 7 (of 7 total)
  • Tesco torch makes
  • trout
    Free Member

    A great host for a quad MR11 kit. or even a MCE using the stock optic

    😀

    Mce in tecso C cell torch using tesco lens :mrgreen:
    this has a good beam for a helmet light to go with your P7 floody bar light

    Innes
    Free Member

    What driver and battery are you using for the MC-E?

    They look good.

    Nice brackets as well, where are they from?

    Innes

    mboy
    Free Member

    Trout, what’s your email address? Got a few questions for ya.

    Cheers

    trout
    Free Member

    Innes
    the driver is a 700 buckpuck I had lying around
    battery 14.8 v lithium ion
    bracket is a lumicycle one

    MBOY-troutie-at-blueyonder-dot-co-dot-uk

    This is such a simple build

    parts needed are

    tesco C cell torch £10 / £12 seems they have been cheaper in some tescos

    series wired mce on a 20 mm star

    700 ma buckpuck driver or driver of choice.

    a small slug of aluminium for the heatsink

    trout
    Free Member
    Vortexracing
    Full Member

    Will a cutter lens fit it?

    it looks like it does, just checking.

    and

    I assume you drill and tap the housing for the lumi clamp?

    BTW very neat and cheap.

    looks spot on.

    well done.

    trout
    Free Member

    Hi Vortex
    the cutter lens is a perfect fit will need a bit of silicon for waterproofing

    drill and glue in a captive nut for the mount as there is not enough meat to take a tap unless you put a larger slug in and tap that.
    which is what I have done for the quad cutter one.

    :wink:not really my own idea Smudge did a cutter one before xmas

Viewing 7 posts - 1 through 7 (of 7 total)

The topic ‘Tesco torch makes’ is closed to new replies.