Home Forums Bike Forum Big rotors

Viewing 8 posts - 1 through 8 (of 8 total)
  • Big rotors
  • 1
    chrismac
    Full Member

    Hi All

    In an attempt to stop destroying brake rotors by being a habitual brake dragger in the alps Im thinking of putting 220mm rotors on. Does anyone have a recommendations as to which adaptor to use for fox36s. There seems to be loads out there ranging from £8 to about £25. Anyone have any experiences please

    Thanks

    nickc
    Full Member

    I always look at Galfer first. They generally have what you’ll want and 1. it’ll be well made, and 2. reasonably priced.

    chrismac
    Full Member

    Thanks nickc. I agree they are my goto in general

    Onzadog
    Free Member

    I default to Hope. Being machined, I’d hope that they are more accurately faced.

    1
    fooman
    Full Member

    Some are thicker than others, 1.8mm to 2.2mm is common check your break caliper capacity. Shimano SM-RT66 220mm are £13.99 at Merlin Cycles, only 1.8mm but a good price for a branded rotor.

    1
    mattrockwell
    Free Member

    Same as nickc, Galfer have served me well.

    honourablegeorge
    Full Member

    +1 for Galfer, good quality, inexpensive adapters

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.