11-32 cassette
probably a 42t SS chainring
will I need a chain keeper or is there a chance it'll be ok?
Bike Forum
1x9 on road?
-
Posted 9 months ago #
-
with a unramped chainring its fine IME
Posted 9 months ago # -
Yup, works well.
11-28 with a 105 rear mech and an unramped 42T Salsa chainring.
I do use a N-Gear Jump Stop on the inside though.Posted 9 months ago # -
i use a 44t ramped deore chainring and a superstar xc guide its been excellent for about 7000 miles
now the ring is wearing its dropping under power so im looking for a 44t 104bcd 4arm dh ring ......anyone
Posted 9 months ago # -
I used to use a 42 and a 12-27 cassette. I didn't use a guide/ keeper.
Posted 9 months ago # -
use a 48t ramped deore front ring and it drops all the time when dropping off kerbs and stuff. Fitted my own chain device (a front mech cage and a plastic bracket) and it's been fine since.
Posted 9 months ago # -
i ran 1x9 on a roadrat, the front chainring had a guard on it but never had any bother
Posted 9 months ago # -
As epo-aholic, Roadrat 45 front and a 105 cassette with a 105 rear mech. Worked a treat.
Posted 9 months ago # -
i was running 11-25 with a 42t un-ramped on my tri-cross and using the n-gear thing too - the jump stop is really good, chain never came off riding but if it ever was pushed off in transit or when cleanign you could pedal it back on like you had a mech
i now have a double ring as scottish hill routes are too steep
Posted 9 months ago #
Reply
You must log in to post.
