Home Forums Bike Forum Wheel build- rough estimates (any NWest recommends?)

Viewing 13 posts - 1 through 13 (of 13 total)
  • Wheel build- rough estimates (any NWest recommends?)
  • hora
    Free Member

    If I supply the rims and spokes. Roughly how much will a LBS charge me? I’m weighing up whether to newbie **** up a build and then take it to a shop or just take it to a shop.

    Also- any recommended indie mechanics etc etc in the NWest who are renowned/good at building wheels?

    matthew_h
    Free Member

    Assuming you get the spoke lengths correct and there is no faffing about then I charge £36 per wheel for builds.

    reggiegasket
    Free Member

    Rich at Fuse Cycling does my builds, and is NW based. Search FB for Fuse.

    DaveyBoyWonder
    Free Member

    My default answer – Blazing Saddles. Built mine at xmas (they supplied rims and spokes though) for what I paid, considering the rims were ~£60 each I think I got a dead good deal. Perfectly built, not needed any attention in nearly 6 months pretty regular use… Would use again – no brainer…

    andybrad
    Full Member

    i use cycle-fast.co.uk seems ok to me.

    alibongo001
    Full Member

    2nd vote for Cycle fast in Halifax

    He went out of his way to do one for me overnight last year when I had a pretzeled rear wheel and the ‘Ard Rock Enduro the next day.

    Scapegoat
    Full Member

    So that’s three now for Cycle-Fast. Think he charges £20 a wheel. Bloody good egg.

    hora
    Free Member

    Ok…

    BTW hows the billion dollar man repairing/getting on?

    Bregante
    Full Member

    Why not ask our ginger friend hora? He did a good build when he was at NWMTB

    bjj.andy.w
    Free Member

    reggiegasket – Member
    Rich at Fuse Cycling does my builds, and is NW based. Search FB for Fuse.

    +1
    He made up some H Plus Son Archetypes rims on hope hubs for me and they’ve been faultless.

    Scapegoat
    Full Member

    BTW hows the billion dollar man repairing/getting on?

    Fracture clinic tomorrow to see how the clavicle is doing. The damage to my hip has exacerbated the previous impingement to the point I’ve had to triple my codeine intake just to get through the day, and I can only walk with a distinct hobble. I’ve now got a further referral to an orthopaedic clinic, as it looks like I can no longer put off a proper replacement. Bike’s mended though, and you’ll be pleased to hear the PX frame has been replaced with a Dedacciai…. should be with me by the weekend.

    Tracey
    Full Member

    Drop them in at 18 Bikes next time you are in the Peak. They made a first class job of building my LB carbon rims onto existing hubs. Droped Abigales wheels in yesterday for a rebuild onto some spare rims after she trashed the rear wheel on her Chameleon on the Jolly gap in Greno. You wont be disappointed

    bluearsedfly
    Free Member

    I can thoroughly recommend Neil at Rebound Suspension in Horridge, on a par with the prices above and turned round a few builds for me asap with no problems.

Viewing 13 posts - 1 through 13 (of 13 total)

The topic ‘Wheel build- rough estimates (any NWest recommends?)’ is closed to new replies.