Viewing 13 posts - 1 through 13 (of 13 total)
  • What thread rear bolt through?
  • Premier Icon matt_outandabout
    Full Member

    Radon Swoop 170

    Rear axle is 12 X 148

    There seems to be a few thread pitches and lengths…

    Does anyone know the correct size to order a new axle?

    Premier Icon scotroutes
    Full Member

    Try the Robert Axle Project website. They let you filter by bike type and give you the details you need.

    Premier Icon nixie
    Full Member

    Is it a branded axle? E.g. X-12, maxle, Shimano e-thru? Do you have the old axle to measure the thread pitch and threaded length? If you do look at the Robert axle project site for a printable measuring guide. The axle overall length depends on dropout thickness.

    Premier Icon nixie
    Full Member

    Based on the pictures on their site I don’t think it’s x12 as the ‘nut’ end is teardrop shaped.

    Premier Icon matt_outandabout
    Full Member

    It’s unbranded, says 148×12 and a random 42.18

    We’ve the old one, it’s pitch we can’t measure it seems…

    I’ll go check that Roberts site.

    Premier Icon nixie
    Full Member

    Roberts site should sort you out then.

    Premier Icon matt_outandabout
    Full Member

    Sadly not – radon not listed, but Cube is and they share a lot of components

    Premier Icon docrobster
    Free Member

    If you print out the guide from Robert axle you can measure the pitch

    Premier Icon nixie
    Full Member

    If you print out the guide from Robert axle you can measure the pitch

    This 👍

    Premier Icon Nobeerinthefridge
    Free Member

    Right, I’m gonna grab a Burgtec bolt through for the Bronson, if yours is the same, ye can have the one on there now.

    Pitch is 1mm (threads are 15mm long, and there’s 15 of them in total), 12mm diameter, total length 168mm.

    If that matches yours, gimme a shout, it’s the DT swiss that came with the bike.

    Gies a shout.

    Premier Icon matt_outandabout
    Full Member

    Will do, and eldest is printing off the guide now…

    Premier Icon Nobeerinthefridge
    Free Member

    How’d it go?

    Premier Icon matt_outandabout
    Full Member

    He’s finally worked out where the printing shop is at uni.. But do you think he communicates with the fam other than a weekly call… 🤣🤣

Viewing 13 posts - 1 through 13 (of 13 total)

You must be logged in to reply to this topic.