Viewing 11 posts - 1 through 11 (of 11 total)
  • Rear mech sticking in 1st
  • patriotpro
    Member

    XT m8000 1x

    As above sticks in first, anyone else had this and sorted it? Grease clutch??

    Indexing is perfect, i’ve spray lubed the inner at the mech clamp but still does it.

    neilforrow
    Member

    new cable? might have a kink in it.

    Premier Icon The Pinkster
    Subscriber

    Is the cassette/chain worn? Unlikely but the chain might be be jamming on the sprocket if bot hare worn badly and can’t release off it.

    patriotpro
    Member

    Both new(ish) on a brand new bike this Feb. Could try new cable, cheers.

    No one else had same then?

    Premier Icon survivor
    Subscriber

    B screw?

    Might need winding in if it’s too close to the cassette.

    B screw would be my guess too. My xtr B screw seems to need a couple of turns every now and then

    Change the jockey wheels

    bigyinn
    Member

    Take the chain off and see if the mech still sticks.
    If it doesn’t you’ve ruled out the mech itself.
    B tension screw would be the next thing to try

    Premier Icon jaminb
    Subscriber

    shifter has been bumped and is pressing against the brake lever – took me ages to work that one out!

    Premier Icon sillyoldman
    Subscriber

    B tension screw sounds likely.

    B screw

    APF

Viewing 11 posts - 1 through 11 (of 11 total)

The topic ‘Rear mech sticking in 1st’ is closed to new replies.