Headset help needed
 

MegaSack DRAW - This year's winner is user - rgwb
We will be in touch

[Closed] Headset help needed

7 Posts
4 Users
0 Reactions
245 Views
Posts: 0
Free Member
Topic starter
 

My 2010 Marin, according to the spec sheet, has the following headset.

FSA ZST No.10, Internal Headset Steel Cup Plastic Top Cover, Black, 1 1/8" Threadless

It isnt in the best of health, so if I was to replace, is it possible to get something better ? Ive tried google, forum searches etc but it all gets very confusing, some describing these headsets as semi integrated and very frame specific etc...

I want a better part if im replacing it, so what would fit ? If I was looking at Cane Creek or Hope, which ones would I need ?

over to the STW knowledge base !

Cheers

H


 
Posted : 18/10/2012 11:35 am
Posts: 0
Free Member
Topic starter
 

Stem has stack height of 40mm if that also helps. Two spacers under it which places stem at the top of steerer with no steerer overlap above the stem.


 
Posted : 18/10/2012 11:40 am
 DezB
Posts: 54367
Free Member
 

Try this?
http://www.canecreek.com/headset-fit-finder

I used some info off Cane Creek's site to find mine. V helpful.


 
Posted : 18/10/2012 11:41 am
 DezB
Posts: 54367
Free Member
 

[url= http://www.canecreek.com/tech-center/headsets/shis ]This[/url] is what I used, but if your bike's in the headset fit finder, you're sorted 🙂


 
Posted : 18/10/2012 11:44 am
 DezB
Posts: 54367
Free Member
 

PS. If it works, that'll be £15 please.
No free favours on STW.


 
Posted : 18/10/2012 11:48 am
Posts: 0
Free Member
 

Going by the description the ZST is normally for zerostack/semi intigrated. Hope call this an Integral headset and from the pick and mix headsets it is a 2-top cup and B-bottom cup.

There is this FSA on that is pretty good, mine lasted 2 years abuse with no maintneance before i needed to change the bearings (these can be bought seperately) I bought a new headset before realising about the bearings and then sold it on to philconciquence from here as i changed my forks and needed a headset for them.
http://www.chainreactioncycles.com/Models.aspx?ModelID=51070

The hope one as an all in one
http://www.chainreactioncycles.com/Models.aspx?ModelID=18084

however i think the pick and mix works out cheaper, especially here
http://www.merlincycles.com/bike-shop/mtb-parts/mtb-accessories/headsets-1/hope-pick-n-mix-headset-cups.html

HTH

Rusty


 
Posted : 18/10/2012 12:25 pm
Posts: 0
Free Member
Topic starter
 

Cheers all....been at work hence slow reply...u can tell I don't work in IT.


 
Posted : 18/10/2012 3:14 pm
Posts: 1617
Free Member
 

you get a head doctor with the complete one hence the extra.


 
Posted : 18/10/2012 4:32 pm