Home Forums Bike Forum Any good 130mm 29er Fork Deals?

Viewing 8 posts - 1 through 8 (of 8 total)
  • Any good 130mm 29er Fork Deals?
  • funkmasterp
    Full Member

    Not getting on with the MRP fork that came with my bike so looking to change it. Pikes are always reliable. Anything else I should be looking for and anybody aware of any bargains out there?

    Kramer
    Free Member

    ⬆️ Maximum 2.4 tyre may be an issue?

    Onzadog
    Free Member

    Is it a different chassis to the performance elite? I only ask as I’m looking at mine with a Minion DHF 2.5 WT on a 30mm internal rim and a RRP bolt on fender.

    mildred
    Full Member

    I don’t know if you’re interested but I’ve got a set of Cane Creek Helm mk2 air I’m not using. They’re currently sat to 160mm but can easily be reduced using spacers internally. It’s a very easy 15 minute job that’s certainly no harder than a lower leg service.

    Theyve had very little use with the steerer cut to about 190mm (from memory).

    Theyre a superb set of forks, that are in my opinion superior to any Pike.

    The only reason I’m selling is because my Madonna takes a 170mm fork & I was itching to try the z1 coil with fast damper.

    kelvin
    Full Member

    Is it a different chassis to the performance elite?

    Yes. Well, the same as older performance elite, not the same as recent ones.

    I’ve run a 2.5” in my Rhythm, again with bolt on (Synchros) mudguard. Wouldn’t bother trying a 2.6 or a mudguard that goes under the arch.

    Onzadog
    Free Member

    My PE mentioned above is 2017/18. Pretty sure arch clearance hasn’t gone backwards in that time.

    desperatebicycle
    Full Member

    You mean Chain Reaction aren’t the go-to for Fork bargains anymore?? 😆

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.