Stunt scooter wheel...
 

Subscribe now and choose from over 30 free gifts worth up to £49 - Plus get £25 to spend in our shop

[Closed] Stunt scooter wheels

6 Posts
5 Users
0 Reactions
98 Views
Posts: 7864
Full Member
Topic starter
 

Quick one

Anyone recommend a good online skate / scooter shop for stunt scooter wheels?

Looking for something of decent quality for my 10 year old's scooter as the rear tyre has disintegrated in just 3 months of pavement and light ramp use.

I know nothing about how the pricing /quality is measured here so feel free to educate me.


 
Posted : 13/04/2020 9:30 pm
Posts: 28712
Full Member
 

Skate hut.

£22 give or take


 
Posted : 13/04/2020 9:43 pm
Posts: 0
Free Member
 

Is it just the bearings that have collapsed? My son goes through a set every couple of months following daily use.if so just get some off the bay - 2 mins to swap out.


 
Posted : 13/04/2020 9:48 pm
Posts: 28712
Full Member
 

Yep, we got some ABEC 9 bearings for £9 for a set of 4


 
Posted : 13/04/2020 9:52 pm
Posts: 7864
Full Member
Topic starter
 

Thanks all.

He's ripped the actual rubber tyre bit to pieces. There's a section half the size of my little finger that's ripped out back to the rim.

I can see bearings but not tyres online but again feel free to set me straight if that's wrong.

Thanks


 
Posted : 13/04/2020 10:26 pm
Posts: 392
Full Member
 

My son used to skid loads and his rear tyre ended up with a small number of massive flat spots, to the point that it didn't roll so much as bounce from point to point.

I bought half a dozen cheap wheels on AliExpress with the hardest compound I could find (88A - I think there are harder ones but I couldn't see any in the right wheel size) and then sold them to him one at a time as needed. I think they were under a tenner each.


 
Posted : 13/04/2020 10:27 pm
Posts: 11605
Free Member
 

It's not a tyre but a whole wheel you need. Tbh you would be better speaking to a real person who knows about this, different wheels are suited to wood, concrete and generally crap pavements. The 88A is the durometer reading, same as Maxxis use. Lower number is a softer compound but sometimes higher is better when grinding. Like I said, speak to a real human and support your local skate shop (if they are open).

Also, if someone is knackering bearings every couple of months buy better bearings. You wouldn't put crap on a bike and put up with it would you?


 
Posted : 14/04/2020 12:14 am