New garage door req...
 

MegaSack DRAW - This year's winner is user - rgwb
We will be in touch

[Closed] New garage door required - standard up n over or roller stylee

15 Posts
11 Users
0 Reactions
48 Views
Posts: 0
Free Member
Topic starter
 

Garage door is looking a bit jaded so time for a replacement. It's a standard up and over and I'm thinking of replacing with an insulated roller style. We usually always have one car parked in front of the door close enough so it can't be forced open so security isn't too much of an issue.

Any pros/cons or recommendations please.


 
Posted : 18/06/2012 9:50 am
Posts: 0
Free Member
 

Reply to the thread below stating the insecurities of an electric garage door. Make offer for electric garage door at bargain prive.


 
Posted : 18/06/2012 10:00 am
 Rio
Posts: 1618
Full Member
 

Roller door can take up less usable space in the garage but you can't block it by parking the car outside. Also unlike the up-and-over can't be used as a rain-shelter when fettling things. As above - see other thread.


 
Posted : 18/06/2012 10:05 am
Posts: 890
Full Member
 

We replaced an up and over with roller because of space issues and have been very happy with it. You can get some versions with higher security ratings which have extra deadbolts. Not cheap, and up and over would have been cheaper.


 
Posted : 18/06/2012 10:12 am
Posts: 1510
Free Member
 

A roller door is the way to go. I installed one, and as mentioned by the other posts, you park right up to it and still open it.


 
Posted : 18/06/2012 10:15 am
Posts: 0
Free Member
Topic starter
 

Having looked at the other thread it looks like it'll be easier to make an up and over door secure - a lot cheaper too. Roller doors are a lot more weather proof though. Mmm tough middle class decision.


 
Posted : 18/06/2012 10:39 am
 hora
Posts: 0
Free Member
 

Why not take it to a powdercoaters? Strip and recoat?


 
Posted : 18/06/2012 10:41 am
Posts: 0
Free Member
Topic starter
 

It won't fit in my boot, one of the tension wires has snapped, I'd have a large gaping hole whilst it was being powder coated, I'd need to remove all the locks, etc, so not really worth the hassle.


 
Posted : 18/06/2012 10:45 am
Posts: 0
Free Member
 

Thought of a sectional? Hormann make some very nice good quality doors.


 
Posted : 18/06/2012 10:57 am
 Rio
Posts: 1618
Full Member
 

it'll be easier to make an up and over door secure

I think you may be missing some of the points on the other thread - if you buy a roller door it's most likely secure by design (unless you go to a [i]really[/i] dodgy supplier). If you get an up-and-over door you generally need to do something to secure it.


 
Posted : 18/06/2012 10:58 am
Posts: 251
Full Member
 

[i]one of the tension wires has snapped[/i]

one of the scariest diy jobs I've ever done replacing one of the wires on our up and over door.the amount of tension you needed to put on it to get it to hook over - was really worried aout losing an eye if somethign slipped.


 
Posted : 18/06/2012 10:59 am
Posts: 0
Free Member
Topic starter
 

What's good about a sectional door?


 
Posted : 18/06/2012 11:00 am
Posts: 17843
 

I went for a Hormann sectional door last year. Much more secure and you can't use your bodyweight to force it.

You will lose some head space inside your garage due to its frame.

Also it's nice not to advertise to the world that I'm opening my garage as my previous up and over screechy thing did. 🙂

Yes, it was a lot of money but I love my bikes.


 
Posted : 18/06/2012 11:04 am
Posts: 0
Free Member
 

Drop me an email if you 're looking for a price, I'll see what I can do for you.
If you talk to me nicely we could even negotiate a bit of STW discount.
EDIT: Call me stupid, but what other thread?


 
Posted : 18/06/2012 11:21 am
Posts: 0
Free Member
 

Sectionals are just good and secure by design. Not cheap but you gets what you pays for! But the old adage still stands if the tea leafs want something that's inside they'll usually get at it, at the very minimum, no matter what you do!!
Ive had 20 ft steel clad containers with anti vandal locks, this that and the other, what did they do? Just broke into a jcb and used it to rip the bloody door off!


 
Posted : 18/06/2012 11:45 am
Posts: 0
Full Member
 

one of the scariest diy jobs I've ever done replacing one of the wires on our up and over door.the amount of tension you needed to put on it to get it to hook over - was really worried aout losing an eye if somethign slipped.

Hmm, when I did mine it was pretty straightforward, though I did spend the extra tenner on the tension bar kit. Had to crank it up pretty hard though before the age old spring actually had any effect.

For £30 I was pretty happy (even a video on the site), I nkow people who've spent 30x that on a reduced roller door.


 
Posted : 18/06/2012 11:50 am