Topic starter
I fitted a ceiling. There's a varying gap along all the edges, with little behind it.
How best to get a nice clean corner?
Posted : 02/09/2009 1:46 pm
bonding plaster - mixed thick and rammed in*, then board finish over.
* depending on maximum width. If it needs packing then use some plasterboard strips.
Posted : 02/09/2009 1:49 pm
drywall adhesive and tape
Posted : 02/09/2009 1:52 pm
cornicing?
Posted : 02/09/2009 2:08 pm
cornicing
top idea!
[img] 
[/img]
🙂
Posted : 02/09/2009 2:10 pm
Topic starter
Ta. Jeez will it ever end?
Would go with coving but it's amodern kitchen (albeit in a 1920's flat) so I think it would look a bit odd. Also a bugger to bring home from B&Q in the hairdryer.
Posted : 02/09/2009 2:12 pm
Cracks should be papered over 🙂
Posted : 02/09/2009 2:14 pm
tape and drywall adhesive
Posted : 02/09/2009 2:30 pm
As an ex plasterer, bonding, push it up,just as it is about to set, scrape it even,then the filler of your choice,sanded smooth.Tape will always leave an edge.
Posted : 02/09/2009 2:32 pm