If lateral movement...
 

MegaSack DRAW - This year's winner is user - rgwb
We will be in touch

[Closed] If lateral movement is side to side..

36 Posts
26 Users
0 Reactions
706 Views
Posts: 1013
Free Member
Topic starter
 

what is the equivalent for up and down? Vertical doesn't quite cut it. Perpendicular? But that suggests relationship to another predetermined line? And while we're at it - back and forwards?


 
Posted : 29/08/2015 7:56 pm
Posts: 0
Free Member
 

Fore and aft??


 
Posted : 29/08/2015 8:01 pm
Posts: 65995
Full Member
 

verteral. And longeral.


 
Posted : 29/08/2015 8:02 pm
Posts: 0
Free Member
 

Bouncing 🙂


 
Posted : 29/08/2015 8:09 pm
 pnik
Posts: 634
Full Member
 

LONGITUDINAL.?


 
Posted : 29/08/2015 8:11 pm
Posts: 21531
Full Member
 

Radial.


 
Posted : 29/08/2015 8:11 pm
Posts: 21531
Full Member
 

What are we actually discussing anyway?


 
Posted : 29/08/2015 8:12 pm
Posts: 10474
Free Member
 

Should all be covered by Roll yaw pitch climb\descend accelerate/brake and errrr... go sideways?


 
Posted : 29/08/2015 8:13 pm
Posts: 1013
Free Member
Topic starter
 

Northwind has clearly been on the soup (or is überclever).
Lady Gresly can stick her nautical terms up her yacht.
And when my bike yaws, I know I'm in trouble - no need for that much airtime.
LONGITUDINAL looks like a winner for back and forth, though.
So a word that decribes movement within the vertical plane?


 
Posted : 29/08/2015 8:41 pm
Posts: 27
Free Member
 

altitudinal?


 
Posted : 29/08/2015 8:55 pm
Posts: 27
Free Member
 

elevational?


 
Posted : 29/08/2015 8:56 pm
Posts: 2661
Free Member
 

Reciprocating


 
Posted : 29/08/2015 9:30 pm
Posts: 1
Free Member
 

Fore and aft


 
Posted : 29/08/2015 9:50 pm
Posts: 1013
Free Member
Topic starter
 

So we have lateral, longitudinal and altitudinal movement across the three dimensions.
The fourth and fifth dimensions can wait for another thread and glasgowdan can sail away with lady gresley in a beautiful pea green boat.


 
Posted : 29/08/2015 10:22 pm
Posts: 2642
Free Member
 

So a word that decribes movement within the vertical plane?

That'll be 'vertical' then 😉


 
Posted : 29/08/2015 10:48 pm
Posts: 0
Free Member
 

I'd say the three are lateral, longitudinal and vertical - so as per above


 
Posted : 29/08/2015 11:27 pm
Posts: 11605
Free Member
 

And while we're at it - back and forwards?

LONGITUDINAL looks like a winner for back and forth, though

But isn't. The word you are looking for is axial.

And the movement up and down would still be lateral, just in a different plane.


 
Posted : 30/08/2015 12:50 am
Posts: 2642
Free Member
 

But what about transverse? Is it the same as lateral?

(And 'axial' implies an axis, so might better be paired with 'radial', which also implies an axis...:O)


 
Posted : 30/08/2015 1:06 am
Posts: 2642
Free Member
 

Front to back
Side to side
Up and down

There! 🙂


 
Posted : 30/08/2015 1:08 am
Posts: 11605
Free Member
 

Transverse relates to orientation (as opposed to longitudinally), think engines.

Yes axial and radial imply an axis, how else do you set a datum for the movement?


 
Posted : 30/08/2015 1:40 am
 JoeG
Posts: 0
Full Member
 

Reverse cowgirl! 😛


 
Posted : 30/08/2015 1:50 am
Posts: 6235
Free Member
 

Shirley longitudinal goes with latitudinal rather than lateral???


 
Posted : 30/08/2015 6:11 am
Posts: 1325
Full Member
 

Up and down movement is 'heave'.


 
Posted : 30/08/2015 6:51 am
Posts: 7121
Free Member
 

Dorso ventral movement


 
Posted : 30/08/2015 7:02 am
Posts: 3581
Full Member
 

If "wobble" is sideways, "wibble" must be the opposite direction, shirley?


 
Posted : 30/08/2015 7:14 am
Posts: 0
Free Member
 

Jiggle


 
Posted : 30/08/2015 7:16 am
Posts: 0
Free Member
 

Surely it's vertical if we're talking bike/frame movement.


 
Posted : 30/08/2015 7:24 am
Posts: 4693
Full Member
 

There are only 6 types of movement.
X, Y and Z translations, along 3 mutually perpendicular axis, and the 3 rotations about these axis.
So you define where X, Y and Z are, then it's easy. For example, movement is a translation in X, or a rotation about Y.

Simple.


 
Posted : 30/08/2015 7:28 am
Posts: 5750
Full Member
 

Surely Longitudinal Latitudinal and altitudinal only pertain to points on the earth's surface and are constrained by datums (Greenwich Meridian, Equator, Sea Level). If you want to define movement relative to an obvious direction of travel, then front to back, side to side and up and down would suffice. Any other, more scientific definition within space would need movement to be defined relative to the XYZ axis as above.


 
Posted : 30/08/2015 8:20 am
Posts: 0
Free Member
 

What does lateral imply that vertical doesn't?


 
Posted : 30/08/2015 8:22 am
Posts: 3581
Full Member
 

There are only 6 types of movement.
X, Y and Z translations, along 3 mutually perpendicular axis, and the 3 rotations about these axis.
So you define where X, Y and Z are, then it's easy. For example, movement is a translation in X, or a rotation about Y.

With all your postulating about X, Y and Z I think you have forgotten about the key direction in mtb'ing - W. Where the W stands for Wobble.

Simples


 
Posted : 30/08/2015 8:31 am
Posts: 12706
Free Member
 

Up and down? Thats just plane normal.


 
Posted : 30/08/2015 8:59 am
Posts: 45697
Free Member
 

Front to back
Side to side
Up and down

[img] [/img]


 
Posted : 30/08/2015 9:00 am
Posts: 27
Free Member
 

Front to back
Side to side
Up and down

this is also how I tell my 3-yr old to wipe his bum.


 
Posted : 30/08/2015 9:40 am
Posts: 5750
Full Member
 

Having had time to think about this, I feel side to side should be replaced with left to right in order to remove any cause of ambiguity.


 
Posted : 30/08/2015 10:22 am
Posts: 10631
Full Member
 

Linear


 
Posted : 30/08/2015 11:37 am
Posts: 4693
Full Member
 

With all your postulating about X, Y and Z I think you have forgotten about the key direction in mtb'ing - W. Where the W stands for Wobble.

No.
Wobble is just a (probably) sinusoidal motion in one direction, say Y, while moving in the X direction.
Keep up please!


 
Posted : 30/08/2015 11:39 am