I only seem to have 90mm of travel on these forks.
LBS took out spacers (they were meant to take it down to 120) ... and yes, I have lost the spacers
I can buy a universal spacer kit ... but it doesn't apply to RC Rev solo air.
How do I know if I have solo or dual air (I accept that this is a very stupid question)
As there is a value for pressure on the top and bottom of the leg, can I assume it is dual air?
Ta!
Does it have a air valve at the base of the air side leg?
it does ...
Doesn't taking out the spacers increase the travel?
Maybe my fork is different, but to change the travel on a solo air revelation I had to get a different length air leg (I went from 130 to 150mm travel).
To reduce travel on dual air revs you add spacers, so you haven't lost them they're just in the fork..
Sounds like a strip and service will get you back to 120mm to me.
Arse - just ordered the spacers ...
Okay thanks for all the help .
I need to investigate further .... I had them reduced from 140mm and was handed back two spacers ...
They'll have used a spacer travel kit and given you the extra spacers back...
Iirc you get 2x20mm and 4x10mm normally which wouldn't all be used.