I've got one of these mobi v15 units with a knackered gun. I can't find mobi spares anymore, so anyone know if the aqua2go gun will fit?
If so do I need a different hose or connector?
You need a newer style connector
So I'm guessing you can chop the end of the old hose and just fit a new style connector to it?
It's been a while but is it Nomad that make both the old dirtworker and newer mobi?
If so they've sent lots of parts for my dirtworker in the past, majority for free!
Have you tried emailing them direct for spares?
Nomad are a different company I think.
[url= http://singletrackworld.com/forum/topic/mobi-v-15-washer-anyone-have-an-old-dead-one ]http://singletrackworld.com/forum/topic/mobi-v-15-washer-anyone-have-an-old-dead-one[/url]
Where have you found the Aqua2Go gun for sale as my Mobi gun is knackered as well?
Tom KP
I've just ordered one of these to see if I can fit it on the Mobi hose and then use a standard (cheap) gun.
http://spares.hozelock.com/product/9mm-hose-end-connector-1/
Update: It worked.
I had to heat the hose and stretch the end of it a bit (with a large hex key) but it eventually went on to the Hozelock fitting. Tried it out this afternoon - no leaks, pressure seems a wee bit lower than before but still OK for rinsing the worst off.
I've just fitted one to my Mobi Washer. All you have to do is buy the new style connector. Works really well.
Bought the gun from a shop on eBay.
Tom KP