Forum menu
Air Pikes losing tr...
 

[Closed] Air Pikes losing travel

Posts: 463
Free Member
Topic starter
 
[#1644575]

Why, and how can i get my 15mm back?!


 
Posted : 26/05/2010 11:48 am
Posts: 0
Free Member
 

1: There's a leak.

2: Get them serviced.

Next: My hair is getting longer, how can I shorten it? ๐Ÿ™„


 
Posted : 26/05/2010 11:50 am
Posts: 40432
Free Member
 

I'll try to be a bit more civil.

Do you have more air in the neg than the pos chamber? I believe this can cause them to sit further down in their travel.

My new Rev is doing it too so I need to investigate this as well.


 
Posted : 26/05/2010 11:52 am
Posts: 19914
Free Member
 

It quite possible there's an air leak from +ve to -ve air, which will drag them down. Service is the only cure for that

But

Try letting all your -ve air out, checking the +ve pressure, then resetting the -ve to no more than the same pressure as the +ve

That will give you your travel beck, but if they keep dropping, it's service time I'm afraid! ๐Ÿ™‚

EDIT
Air Pikes seem very prone to this, I've heard of it on quite a few sets, mine included


 
Posted : 26/05/2010 11:53 am
Posts: 4306
Free Member
 

Tempory fix - drop all the air out of the -ve chamber - they'll extend back to full travel, then refinflate. (worth topping up the +ve air as well as it's leaking out of there into the -ve chamber.


 
Posted : 26/05/2010 11:53 am
Posts: 0
Free Member
 

chakaping - Member
I'll try to be a bit more civil.

It's a dirty job, but someone's got to do it...


 
Posted : 26/05/2010 12:15 pm
Posts: 463
Free Member
Topic starter
 

Good advice (barring Woppit obviously, and your wacky sense of humour) dropping then resorting -ve seems to have done the trick. This [b]is[/b] a useful forum!


 
Posted : 26/05/2010 12:55 pm