2013 2x10 SLX rear ...
 

[Closed] 2013 2x10 SLX rear mech (shadow +) question - 38-24 with 11-36 - GS or SGS mech?

Posts: 966
Free Member
Topic starter
 

just priced up a groupset via Rose & Bike Discount which works out at £255 plus postage (not including brakes).

i'm a little confused about which rear mech to go for.

i'm going for a 38-24 on the front and a 11-36 on the back. the bike is for my wife, hence the low gearing (although, for £7 more, i could have a 11-34 xt rear cassette?!?).

(36-11)+(38-24) = 39

the gs rear mech states capacity as 35 teeth (although states that it works with a 11t - 36t rear sprocket and a 22t chainring difference), so i'm guessing i need the sgs rear mech?

does anyone have a definitive answer to this?

cheers

p.s. I presume there is little merit in spending more on a XT groupset?


 
Posted : 29/01/2013 11:19 am
Posts: 966
Free Member
Topic starter
 

bump


 
Posted : 29/01/2013 12:15 pm
Posts: 0
Free Member
 

Not sure if this helps but...?!

http://singletrackworld.com/forum/topic/slx-shadow-plus-mech-question


 
Posted : 29/01/2013 1:19 pm
Posts: 0
 

I run the long cage SLX mech on my soul with the same ring/cassette combination and its fine, not sure if its right or wrong, but it works. Mine isn't the + version (well not yet anyway)but I presume the cage lengths are the same.


 
Posted : 29/01/2013 1:33 pm
Posts: 966
Free Member
Topic starter
 

cheers for the reply.

i have ordered the sgs rear mech (longer cage) as it will allow use of all gear combinations (regardless of whether they are sensible or not). if i went for the medium cage, certain combinations would be outside of scope (such as little/little which would leave too much slack).


 
Posted : 29/01/2013 2:14 pm