[Closed] 1x10 crank set up.

XT 760 cranks, 33t E13 Guide Ring, E13 XCX chain device (and XTR Shadow+ mech)

Works spot on but I'd really like to have newer cranks, no reason other than tartiness

1x10sp. SLX M665 cranks with middleburn 34t ring, Superstar XCR chainguide.

Not lost the chain yet & have ridden Nant yr Arian, Climachx, Coed y Brenin (Beast), Cwm Rhaeadr, most of Bristol's trails & a week of sessioning Rowberrow woods on the Mendips.

XT cranks, e13 guide ring, lg1+, 11-36

X0 cranks, MRP lopes SL and 36t Renthal.

X9 crank arms with XO DH spider, Hope 34T ring and E13 LG1 Trail on the 146, and X9 crank arms with Homebrewed Components 34T ring and Superstar XCR upper chain guide on the 29er.

Old SLX cranks here, with 32t e*thirteen chainring (might try a Hope one next) and new 32t specific Straitline Silentguide with bash ring. Lightish, rugged and I'll never drop a chain. Maintenance free, too which is always good.
[IMG] [/IMG]

really tempted to go this route. maybe when drivetrain is worn out

on heckler old xt 10sp cranks, 34t renthal, 11-36 cassette with xt rear mech. e13 device no roller. chain has come off the bottom of the chain ring a few times, so am going to try an e13 LS1.

for info on old 1x9 ride to work bike i use an old mech with limit screws wound in, and a 40th front, 11-32 cassette.

456 is going to get old 9sp xt cranks, renthal 32t, e13 device.

straitline device above looks really nice.

Truvativ Firexx Crank, Hope Bash, Hope 32T chainring, N-gear Jumpstop:

[img] [/img]

xt m780's, with an e13 LG1+, and a Renthal 36t

Old XT M760 crank arms here, with a 32T Gussett Chainring at the moment (will probably replace with a SS On One when worn out as ally rings seem to wear fast), and an MRP Lopes SL chain device. Works for me.

Though if I had the cash right now, I'd be tempted by that 32T specific Straitline silent guide pictured above... Does look good!

I'm running an XTR crank, MRP Lopes chain device and Goldtec 34t ring. Very very impressed with it so far too.
[IMG] [/IMG]

Middleburn UNO, 34 ring, E13 XCX

[url= http://farm9.staticflickr.com/8008/7148775629_64a41df2ee.jp g" target="_blank">http://farm9.staticflickr.com/8008/7148775629_64a41df2ee.jp g"/> [/img][/url]

nice middleburns. did you buy that bike form 18bikes about 3 weeks ago? i saw it in the shop.

I really like the Silent Guide but I have Jones'd M960 XTR cranks on one bike so I can't run a bashguard. At the moment I just have a top guide but I do sometimes lose the chain in the gnar so would like a full guide.

[img] [/img]

I'm looking at the new Blackspire Der guide as it replaces the noisy lower roller of most guides with a "plastic?" runner like the Silent Guide. The Der is out at the end of the month... I'm saving my pennies.

[img] [/img]

I have SLX cranks, e13 34t chainring, and a MRP Lopes guide. The Lopes guide is light and good to setup, but I've smashed the bottom guide twice now and it's £25 for a small piece of plastic and a bolt. Grr.

Eventually went for saints with straitline silent guide and e.thirteen ring. Will post pics when I get it fitted.
Thanks for all the inspiration.

XT M785, 34T hope chainring, E Thirteen LG1 Trail chain device, stronglight short chainring bolts. 11 - 36 XT cassette.

1x9 here but MRP 1x and an unramped FSA chainring with my Raceface Evolve XC cranks.

1x10, is that some kind of group sex?

Apparently 1x only good for hardtails; http://dw-link.blogspot.co.uk/2008/10/single-chainrings-and-detrimental.html

who'da thought it

SLX cranks, Renthal 32t ring, Straitline silent guide

XTR M985 cranks, Experimental Prototype 36t custom ti chainring (due to stupid 88mm BCD), Superstar XCR guide with home made seat tube mount.