Shimano brake spare...
 

[Closed] Shimano brake spares

Posts: 20
Free Member
Topic starter
 

I need a new push rod (that screws into the level and doubles as the reach adjuster) and brass washer and circlip: Does anyone know where/if they are available? They are for Saint brakes (not the new model, but the previous version.

I have tried a few websites (Chain Reaction, Wiggle, Merlin) but to no avail.

Thanks folks.


 
Posted : 02/08/2009 9:45 pm
Posts: 0
Free Member
 

I tried to source new caliper parts before and was told that spares are not available - buy a new caliper.

Maybe the same applies to the levers?

CRC were doing the levers (LX/XT/Saint are all the same lever I think) for about £20 ish a while ago


 
Posted : 02/08/2009 9:50 pm
Posts: 21639
Full Member
 

you could try the shimano website for the tech documents, get the part number from the exploded diagram and try giving Madison a call. However, Shimano have never been known for spares!


 
Posted : 02/08/2009 9:52 pm
Posts: 2
Free Member
 

Have a look here at the [url= http://techdocs.shimano.com/media/techdocs/content/cycle/EV/bikecomponents/BL/EV-BL-M800-2386_v1_m56577569830608743.pdf ] Exploded diagram[/url].
Then put the part number into [url= http://www.petracycles.co.uk/ ] Petra cycles[/url]

Hopefully you will find what you are looking for.

Gordymac


 
Posted : 02/08/2009 10:39 pm