MegaSack DRAW - This year's winner is user - rgwb
We will be in touch
I have had some building work done, it left a hole in the ceiling level coving where some pipes used to be:
[img] 
[/img]
I would like to do something to improve the appearence of this. Since the house is a 1900 odd terrace I am guessing I can't nip down to B&Q for another section of that coving.
Any suggestions for how to fix this to a tolerable level (it is 8ft up so unlikley to draw too many gazes) in a tolerable timescale (not really into taking plaster casts of the adjacent section if I can avoid it!)
Any suggestions appreciated, cheers.
keppoch
Looks like its filler time and plenty of sanding back to shape.
Fill the deep bits first with bonding, then move on to filler. Apply in layers and sand back. Repeat as required
Bonding? Is that bonding plaster?
My only other idea so far was to glue in a piece of wood of something like the right shape and then fill on top of that.
Cheers chaps, more dust and filler it seems!
As they say - creative filler carving
Bonding can be applied in deeper layers so is good for filling gaps but its a bit daft to buy a bag for that little bit
Yep, bonding plaster. It's thick, sticky and dries quick. It also dries hard and rough, so no good for sanding. Get some polycell trade filler, dries quick and smooth and easy to sand
Have followed your advice and five sessions of fill and sand and the results are pretty pleasing. I will post some pictures at some point.
I've no interest in going into business doing this though!
Thanks all.
Expanding foam, from a can. Let it dry then run a hacksaw blade from side to side along the existing to saw it off to shape. Then fill smooth.