Wheel trued and new...
 

[Closed] Wheel trued and new spokes fitted - funny noises

8 Posts
7 Users
0 Reactions
52 Views
 Pook
Posts: 12684
Full Member
Topic starter
 

kind of musical, not unpleasant, coming from the back. I thought it was birds at first, then some wind chimes - but it followed me up the road then seemed to silence.
Normal? Or am i going mad?


 
Posted : 14/05/2009 8:42 am
Posts: 637
Free Member
 

http://www.sheldonbrown.com/wheelbuild.html#seating


 
Posted : 14/05/2009 8:43 am
Posts: 0
Free Member
 

Did you squeeze the spokes together with your hand to stettle them in and then re-true / tighten?


 
Posted : 14/05/2009 8:44 am
 Pook
Posts: 12684
Full Member
Topic starter
 

dunno - LBS did it for me.


 
Posted : 14/05/2009 8:46 am
 Hip
Posts: 0
Free Member
 

It could have been the spokes untwisting... As spokes are tensioned some slightly twist, unless you have some tape or other indicator on them you don't notice. once they are seated the chimes will stop.

Doesn't seem happen with machine built wheels.


 
Posted : 14/05/2009 8:58 am
Posts: 0
Free Member
 

LBS didn't finish off your wheel properly... probably won't be an issue but not very professional...


 
Posted : 14/05/2009 9:02 am
Posts: 0
Free Member
 

piss poor build

If the negelcted destressing the wheel they cant be very good at wheel building!


 
Posted : 14/05/2009 11:56 am
Posts: 0
Free Member
 

to be fair you can have just a few very small plinks which don't have any siginificant effect on the wheel long term even if you have de-stressed it a couple of times - just not done hard enough.


 
Posted : 14/05/2009 12:36 pm
Posts: 0
Free Member
 

Doesn't sound very well built if it isn't stress relieved properly the spokes will probably come loose and the life of the wheel will be greatly reduced.
Had that on a set of dave hinde road wheels once first ride all sorts of noises then the wheel wobble i rang them they told me to retighten the spokes !
Years later when i started to build my own i realised that was a load of rubbish.


 
Posted : 14/05/2009 12:42 pm