Started unscrewing main part of the air can (larger bit, with sticker on) and eventually it started to move. Problem is that it seems it's a different part to the lower (smaller) part of the air can, and that doesn't move at all! Any hints?
Hi Bucko 🙂
It's worth a look on youtube as there are often how tos on there. Maybe tft's website too
Hullloooo. How's things? How was the Boat Race? I had to be ready Monday for our big exhibition of the year.. was finishing website Sunday evening.. fun! Been meaning to email you to see how things were. Will email you to arrange a trip soon... if that's ok.
Still having shock problems, but ta for advice.
Yeah, cool. Drop me an email
Make sure all the air is out obv.
The large can is held on my a large C clip at the end, and isnt scewed on iirc.
The smaller can just unscrews like an RP etc.
You need to unscrew the smaller part of the air sleeve, if not by hand with a strap wrench or something(try an old inner tube poss) Its just a bit tight thats why the high volume part is turning.
the bit with the sticker on will just slide off once you take out the circlip at the end (it may go pop)
the main body underneath will then unscrew, just use a bit of old innertube in your hand to grip it
MAKE SURE YOU'VE LET THE AIR OUT!
once you have, cycle it a few times and let more air out - if it's stuck down, be prepared for a BANG