Forum menu
strong reliable roa...
 

[Closed] strong reliable road rim?

Posts: 233
Free Member
Topic starter
 
[#6702500]

Can anyone recommend a road rim that's robust, reliable and reasonably light. Something that can take 32c tyres and a few rough roads. Stansted grail seems an option but is there anything else. Cheers.


 
Posted : 13/12/2014 10:39 am
Posts: 43955
Full Member
 

Open Pros


 
Posted : 13/12/2014 10:44 am
 kilo
Posts: 6925
Free Member
 

archetype, ailerons and pacenti sl25 all got mentioned positively on the recent cx wheel thread


 
Posted : 13/12/2014 10:44 am
Posts: 0
Free Member
 

I would have thought most rims would be strong and reliable nowadays, assuming that the wheel was well built and had an appropriate number of spokes if the rider was of a heavier build?

32mm tyres should add a fair bit of protection so far as flat spotting or other damage that you might not be able to true out.

As above, Open Pros or Archetypes.


 
Posted : 13/12/2014 11:24 am
Posts: 25941
Full Member
 

see if CRC are still flogging wtb i19 cheap - 29er mtb rim but work OK with 28s IMO, probably even 25s

Rim has a UST-like ridge too, so hold a tubeless tyre well (actually a bit hard to unseat ๐Ÿ˜ณ )


 
Posted : 13/12/2014 11:28 am
Posts: 41395
Free Member
 

As above, almost all 400gm+ rims will do this.


 
Posted : 13/12/2014 12:23 pm
 benw
Posts: 227
Free Member
 

ambrosio excellence,they are balanced as well.they also look good which is after all the most important thing


 
Posted : 13/12/2014 12:33 pm
Posts: 0
Free Member
 

Open pro probably a bit too narrow for you. Something like an Archetype would do.

If you want strong and light then there are some wide Chinese carbon rims that seem well rated.


 
Posted : 13/12/2014 1:25 pm
Posts: 43955
Full Member
 

Open Pro too narrow? What makes you think that?


 
Posted : 13/12/2014 1:27 pm
Posts: 0
Free Member
 

I have a set of open pro's and they are a bit old school in width. Fine for 23 but the op wants to run 32. Reckon they'd have a better profile on a wider rim. Even 25 are nicer on the archetype. All IMO of course ๐Ÿ™‚


 
Posted : 13/12/2014 1:28 pm
Posts: 43955
Full Member
 

Ah. I run 35mm cx tyres on Open Pros just fine. Cynic-al has run 2.3" mtb tyres on his, again with no issues.

FWIW, my cx tyres definitely had more "volume" on a set of Arch EX though.


 
Posted : 13/12/2014 1:52 pm
Posts: 41395
Free Member
 

mrblobby - Member

I have a set of open pro's and they are a bit old school in width. Fine for 23 but the op wants to run 32. Reckon they'd have a better profile on a wider rim. Even 25 are nicer on the archetype.

Open pros and other rims were absolutely fine for decades.

Wide rims for road bikes is UTTER MARKETING SHITE


 
Posted : 15/12/2014 6:47 pm
Posts: 0
Free Member
 

Open Pro are not too narrow .I use them with 35mm Landcruisers on the 3 peaks cyclocross they are fine


 
Posted : 15/12/2014 7:02 pm
Posts: 0
Free Member
 

Open pros and other rims were absolutely fine for decades.

Just like narrow tyres have been absolutely fine for decades ๐Ÿ™‚

Having ridden 25c tyres on OpenPro and Archetype rims, my personal preference is for them on the wider rims. You may prefer them on narrower rims.

There's a lot of marketing shite out there, but you could dismiss pretty much every bike product on that basis.


 
Posted : 15/12/2014 7:08 pm
Posts: 0
Free Member
 

Open pro will be fine for your needs?

Tough, cheap enough, eyeletted and good trueness out of the box so a competent wheel builder can provide you with well built, durable wheels.

Will accept a wide enough range of tire sizes to provide functionality.


 
Posted : 15/12/2014 7:55 pm
Posts: 41395
Free Member
 

Having ridden 25c tyres on OpenPro and Archetype rims, my personal preference is for them on the wider rims. You may prefer them on narrower rims.

Why? I have no preference - because it makes **** all difference.


 
Posted : 15/12/2014 10:40 pm
Posts: 904
Free Member
 

OP - I presume you want a rim brake rim for road? If so, look at the Pacenti SL23.


 
Posted : 15/12/2014 10:48 pm