Sram rotors with Sh...
 

[Closed] Sram rotors with Shimano calipers.

Posts: 178
Full Member
Topic starter
 

2nd attempt, first thread disappeared into the ether..

As above, changing for slightly more powerful brakes to the new XT four pots and hoping to use the old 180mm rotors.

Will she die? (wifes bike)

Thanks in advance.


 
Posted : 22/11/2018 5:03 pm
Posts: 40432
Free Member
 

I haven''t died using Centreline rotors with Shimano brakes.

But my wife's been topping up my life insurance policy since she found out.


 
Posted : 22/11/2018 5:08 pm
Posts: 178
Full Member
Topic starter
 

Thanks, any differences in modulation or owt like that Cha****ng?


 
Posted : 22/11/2018 5:31 pm
Posts: 40432
Free Member
 

Not that I'd be able to notice.


 
Posted : 22/11/2018 5:41 pm
Posts: 0
Free Member
 

The only disadvantage is that you won't be using ice-tec, which I think genuinely helps stuff. But having said that I use old (not sure what brand but pretty sure not entirely Shimano) rotors across my Shimano brakes.


 
Posted : 22/11/2018 6:53 pm
Posts: 91
Free Member
 

Been using Zees with Sram centreline rotors for over months with no issues.


 
Posted : 22/11/2018 8:17 pm
Posts: 6332
Free Member
 

XT 2-pots with centrelines here. All good. I prefer the centrelines to Shimano rotors. Shimano can be fine but some rotors just squeal like mad, whatever pad setup you use. The centrelines are always good, IME.


 
Posted : 22/11/2018 8:22 pm
Posts: 0
Full Member
 

Not wanting to highjack the thread, but do you get the ‘honk, honk’ in the wet with Shimano Calipers and centrelines? My Guides are horrendous, but my Shimano brakes and ashima rotors are quiet.


 
Posted : 22/11/2018 8:43 pm
Posts: 40432
Free Member
 

No.


 
Posted : 22/11/2018 8:47 pm
 FOG
Posts: 3016
Full Member
 

SLX with centreline no problem. Can be noisy when wet but no worse than SLX and Shimano or SRAM with centreline on the other bikes.In fact the SRAM calipers and disc are the worst of the lot when it comes to noise


 
Posted : 22/11/2018 10:29 pm
Posts: 428
Full Member
 

XT calipers with Centreline - no issues here. Seem quieter than my old shimano ice-techs in wet/muddy conditions... Also, seem less prone to being knocked into wonk than the shimanos.


 
Posted : 22/11/2018 11:12 pm
Posts: 178
Full Member
Topic starter
 

Thanks to all, im gonna save the cash from new rotors:)


 
Posted : 22/11/2018 11:14 pm
Posts: 2675
Full Member
 

I run the opposite, I use Guides or XT Ice Tech with no issues.


 
Posted : 23/11/2018 11:18 am
Posts: 3351
Full Member
 

Just make sure the pads rub/grips on the bit they're supposed to rub/grip on. I ran Shimano SLX brakes with some older SRAM discs. It "worked". However after looking at where the discs showed wear, the pads were rubbing on the rotor arms as well as the braking surface.


 
Posted : 23/11/2018 12:59 pm
Posts: 0
Free Member
 

Weirdly, my Ridley gravel bike came with full Ultegra...and sram rotors. I have no idea why! They are fine with organic pads but laughably unusable with metal sintered ones if it gets even remotely damp.

Forget "honk honk", we're talking "HAAAAHHHRRRRRRGGGGGGAH! HAAAAHHHRRRRRRGGGGGGAH!" every time you touch the brakes.

I am back to organic pads again, funnily enough.


 
Posted : 23/11/2018 5:26 pm
Posts: 0
Free Member
 

I use Sram Rival brakes with Ultegra rotors, I've died twice now, but been resurrected each time,  so on balance I can't say the Sram/Shimano mix really matters tbh.


 
Posted : 23/11/2018 7:45 pm
Posts: 10498
Free Member
 

Flames, it'll end in flames, that and fire, of God don't forget the fire.


 
Posted : 23/11/2018 11:33 pm