Forum menu
Not enough clearanc...
 

[Closed] Not enough clearance for a Mucky Nutz - Suggestions.

Posts: 0
Free Member
Topic starter
 
[#4603146]

I am running a 2.25 Ardent, and a 2.0 Mucky Nutz mud guard. There always seem to be something rubbing.

Any suggestions?


 
Posted : 28/11/2012 5:08 pm
Posts: 251
Full Member
 

crud catcher?


 
Posted : 28/11/2012 5:09 pm
Posts: 50252
Free Member
 

A Crud Gonzo?
[img] [/img]

Works well for me on an E150SL fork with not a massive amount of clearance! With a Crud Catcher as well, I should add.


 
Posted : 28/11/2012 5:11 pm
Posts: 0
Free Member
 

Crudcatcher + Neoguard?


 
Posted : 28/11/2012 5:11 pm
Posts: 6009
Free Member
 

Big fat THE fender in the fork-crown. Moto-styleeee for maximum coverage.


 
Posted : 28/11/2012 5:12 pm
 IHN
Posts: 20126
Full Member
 

Inner tube based/bodged 'beef curtain'?


 
Posted : 28/11/2012 5:23 pm
Posts: 66109
Full Member
 

Depends which direction you want to go. If you want more mud protection, then get a Shockboard or something similiar (I recommend the shockboard, the mounting hardware's gash but cableties fix it, and it performs well enough to forgive that.

If you don't mind less, then a RRP/inner tube. Might want to complement that with a crudcatcher too. Watch your fork seals- this sort of guard can cause more mud to gather round them.

If you want something that looks incredibly awful yet also doens't work very well, then the Crudcatcher + Crudcatcher Ridiculous Spy Vs Spy Nose Thing will work less well than a Shockboard, cost more, and weigh more.

Think that's all the bases covered.


 
Posted : 28/11/2012 5:31 pm
Posts: 0
Free Member
 

Are you sure it's fitted properly, I don't get any rub even running a 2.4 in Magura forks which aren't the best for clearance. It's only wafer thin after all!


 
Posted : 28/11/2012 6:13 pm
 br
Posts: 18125
Free Member
 

Reba forks by any chance?


 
Posted : 28/11/2012 6:26 pm
Posts: 0
Free Member
Topic starter
 

Recons actually


 
Posted : 28/11/2012 7:36 pm
 grum
Posts: 4531
Free Member
 

I have 2.5 tyres with mine and clearance seems fine (Fox 36 forks).


 
Posted : 28/11/2012 7:40 pm
Posts: 0
Free Member
 

I had no clearance for a muckynutz with a set of 29er Recon's running HansDampfs, a crudcatcher isnt enough so i'm going to augment it with a neoguard and hope for the best.


 
Posted : 28/11/2012 8:35 pm
Posts: 17843
Full Member
 

Rockshox don't seem to have masses of clearance for a mucky nutz...

There's virtually no clearance on my Rebas....I keep meaning to make my own version that mounts on top of the brace, rather than under it.


 
Posted : 28/11/2012 10:03 pm
Posts: 0
Free Member
 

Neoguard + crud catcher


 
Posted : 28/11/2012 10:19 pm
Posts: 0
Free Member
 

Earphones!!


 
Posted : 28/11/2012 10:26 pm
Posts: 5728
Full Member
 

There's virtually no clearance on my Rebas....I keep meaning to make my own version that mounts on top of the brace, rather than under it.

I tried a 2.2 Rubber Queen on my Reba's - they rubbed the brace, so swapped em for an Ardent with a mucky nutz guard, was fine until it got muddy when it started rubbing & wouldn't stop... so I'm now running with nothing...just have to keep my eyes closed.


 
Posted : 28/11/2012 10:40 pm