nobby nic tubeless ...
 

[Closed] nobby nic tubeless ready 26" pressures?

Posts: 3509
Free Member
Topic starter
 

whats a good pressure for a nobby nic tubeless ready (11st rider) rigid HT.

I always run them quite high but think a lower psi might help with comfort being rigid

cheers


 
Posted : 27/04/2013 6:31 pm
 br
Posts: 18125
Free Member
 

25psi


 
Posted : 27/04/2013 6:34 pm
Posts: 3509
Free Member
Topic starter
 

front & rear?

I've been running around 40rear & 35front ๐Ÿ˜ฏ


 
Posted : 27/04/2013 6:35 pm
Posts: 749
Free Member
 

I've been running around 40rear & 35front

That is quite high for tubeless. For me around 28 seems to be the sweet spot - find them a bit 'squirmy' lower than that, especially when it's wet. I'm about a stone heavier tho.


 
Posted : 27/04/2013 6:38 pm
Posts: 3509
Free Member
Topic starter
 

28 front & back?

riding around malham tarn 25m race


 
Posted : 27/04/2013 6:41 pm
Posts: 749
Free Member
 

It depends on conditions. If wet I'll run 28 front and back. Dry 28 front 25 back. Might seem small but I can definitely feel the difference.

I used to run these - I now use high rollers @ 25 all year round


 
Posted : 27/04/2013 6:44 pm
 mokl
Posts: 0
Free Member
 

I run one on the front, weigh 11 stone and inflate it to approx 22 psi. Ralph at the back I run at around 25 psi. On harder surfaces I can feel them squirm a bit leaning into fast corners so occasionally run them a bit firmer depending on where I'm riding.


 
Posted : 27/04/2013 7:30 pm