I have been running a set of 1.25" steerer forks in a headset designed for tapered forks, obviously using a reducing crown race. I have now acquired some new (to me) forks with a 1.5-1.25 tapered steerer. But do you think I can find a crown race anywhere to suit. It is a minefield out there.
Current headset is an FSA orbit with External bottom cup and internal top. Standard 45 degree bearings as far as I am aware. Can anyone point me to a suitable seller of a race to fit?
Much obliged
PS I am sure my LBS could help but it is a 20 mile round trip and I am in lock down mode here with lambing at the moment.
UKbikestore seems to have loads - why not phone em up & see what you need ?
perhaps:
http://www.ukbikestore.co.uk/product/402/fsa_h66078/fsa-h6078-15-crown-race-for-zs-headsets.html
So your forks didnt come with a crown race? I'm confused.
😆
uk bike store as above sameplace as windwave so access to loads from memory!
I think, having done a fair bit of detective work, and some cross referencing of sizes that the FSA H6078 listed by Disk Jockey above is indeed the correct one I need. Funnily enough I seem to have already had it in the cart from last night but was not 100% sure that it was the right one. Cheers guys.
if it's 45x45 52mm OD then a Hope race should fit
Cheers Rob, but it seems to be a 1.5in 36 degrees/ 45 degrees ACB Lower.
Ok shame, a lot of the time it's sometime easier (and cheaper) to just buy a new (aftermarket) headset, Hope pick and mix headsets are about £32 and are really well sealed and do a reducer for there 1.5 steerer.
Mackem - oh please, oh please........!
Buying just the lower unit from a hope pick and mix was looked at but I thought it was quite a lot to pay considering my headset is still in good nick but just in need of the alternative race. I am still more than tempted to buy a Works Components 1 degree headset but at £80 I am struggling to justify it.