I know there will be plenty of people here who have tackled this easy task (!), just went to make sure I've got it straight before I bugger it up. Ta
you'll be needing some new olives, unlike hopes which you can reuse the olive, LBS usually have these for free or cheap
Cheers, I'll pop over later. Do I need a tool to fit them?
You don't need a tool to fit the olive but the little clamping blocks to hold the hose to knock a new insert in are pretty useful.
Good article here - http://www.bikemagic.com/news/article/mps/uan/4807
and you should be able to find part nos etc [url= http://techdocs.shimano.com/techdocs/blevel.jsp;jsessionid=w0KxJ4ycMd88hCpKtkj4RrPLMmQ17x5cJgpyGHjhJ1lcKpm12jCX!1681476653?ASSORTMENT%3C%3East_id=1408474395181679&FOLDER%3C%3Efolder_id=2534374302051947&bmUID=1236857532842 ]here[/url] (and bleed instructions)
At the beginning of Mike Davis's article it says about pulling the hoses out of the lever reservoir - a little squeeze of the lever is needed to budge them..
er, what else... bits here: http://www.chainreactioncycles.com/Categories.aspx?CategoryID=564
Any questions?!