fox 32 float 150mm?
 

[Closed] fox 32 float 150mm?

Posts: 0
Free Member
Topic starter
 

have been toying with the idea of getting somes new forks for my hemlock, been looking into the 32 float, 150 fit rlc. are these good for general trail riding or is there somthing better for the £. as these are kashima coated i could also send my rp23 to mojo to get this also?


 
Posted : 27/05/2012 8:57 pm
Posts: 21
Free Member
 

I've got some 150mm and 140mm Float's with Kashima and I think they're excellent in my opinion. Small bump sensitivity is very good and they're sturdy for their travel too. They look the dogs danglies as well 🙂
There's a guy selling some brand new ones on Pinkbike and they're going quite cheap too.


 
Posted : 27/05/2012 9:56 pm
Posts: 3361
Full Member
 

You won't find much better short of a BOS.


 
Posted : 27/05/2012 10:20 pm
 cy
Posts: 724
Full Member
 

I use them on my Rocket. Brilliant forks.


 
Posted : 28/05/2012 2:45 pm
Posts: 1014
Free Member
 

Thought they were pretty good on Cy's Rocket 🙂

Unless someone has stock they'll be the new 2013 CTD numbers though. Not sure availability but should know soon enough as whatever my new bike is the forks will either floats or Bos (160mm Devilles).

Also looked at Revs which can be picked up for between £4-500 from the usual suspects...


 
Posted : 28/05/2012 3:06 pm
Posts: 0
Free Member
Topic starter
 

any one know whop has the best prices for these?


 
Posted : 28/05/2012 6:10 pm
Posts: 0
Free Member
Topic starter
 

does fox still have issues with seals? would i be better off with some rockshox, dont wanna spend £750 on some forks that will be worn out in a few years due to poor seals


 
Posted : 29/05/2012 8:03 am
Posts: 0
Free Member
 

FIT forks? You must like giving Mojo money an awful lot!

😉


 
Posted : 29/05/2012 8:24 am
Posts: 0
Free Member
Topic starter
 

mojo didnt want my money :D, said i need to use one of the dealers


 
Posted : 29/05/2012 5:30 pm
Posts: 0
Free Member
Topic starter
 

has anyone tried the new 2013 forks with CTD-ADJ. guessing these are different to fit dampers? are they still small bump sensitive? will they work ok with a rp23 what does not have CTD-ADJ, just normal pro pedal

tf tuned has these, anyone used these before?


 
Posted : 01/06/2012 5:46 pm