Deore M596 brakes o...
 

[Closed] Deore M596 brakes on rose bikes, worth it?

Posts: 0
Free Member
Topic starter
 

At about 35 quid each they seem like a bargain, has anyone any experience?


 
Posted : 11/10/2011 5:21 pm
Posts: 0
Free Member
 

they'll be ace, but it looks like they've only got left hand levers with a short hose.

(a front brake if you're a left=front braker)

which is a shame, cos that's really very cheap.


 
Posted : 11/10/2011 5:50 pm
Posts: 0
Free Member
Topic starter
 

sheet, you're right. Thanks for the info


 
Posted : 11/10/2011 5:58 pm
Posts: 0
Free Member
 

couldnt be dealing with that ๐Ÿ™‚ i've already tried pulling my left lever on my motorbike thinking it was my brake! damn clutch lol


 
Posted : 11/10/2011 6:11 pm
Posts: 1741
Full Member
 

Could you not just swap the hoses over like loads did on here with the XT brakes from Rose?


 
Posted : 11/10/2011 6:22 pm
Posts: 0
Free Member
 

yes, but they're only selling left levers...


 
Posted : 11/10/2011 6:38 pm
Posts: 1741
Full Member
Posts: 0
Free Member
 

well spotted! - i missed the long/right ones.

hmm... tempting...


 
Posted : 11/10/2011 6:51 pm
Posts: 1741
Full Member
 

Aye very tempting, have them bookmarked for payday ๐Ÿ˜‰


 
Posted : 11/10/2011 6:53 pm
Posts: 0
Free Member
Topic starter
 

Going to pull the trigger I think, anyone used them before? Shimano brakes are usually pretty good, aren't they? I assume the tech just trickles down over the years to the lower end stuff.


 
Posted : 11/10/2011 7:18 pm
Posts: 0
Free Member
 

The old ones got good reviews.

They've now got the servowave operation of the higher models, so would have thought the only downside is a bit more weight.

Do it!! ๐Ÿ™‚


 
Posted : 11/10/2011 7:46 pm
Posts: 8892
Free Member
 

I changed from 595 to 596 on my singlespeed commuter. The callipers are the same but they feel quite a lot more powerful. I reckon this is down to the new narrow diameter hoses they use. Lever length is bang on for single finger braking. I like them a lot.


 
Posted : 11/10/2011 8:06 pm