Anyone got a spare ...
 

[Closed] Anyone got a spare ISIS drive side crank arm?

Posts: 193
Free Member
Topic starter
 

Needed to get a mate's lads bike going again
No ring required but must be ISIS 175mm
Raceface ideally but doesnt really matter
Thanks


 
Posted : 16/07/2020 11:17 pm
Posts: 1331
Full Member
 

I think there’s a set of ISIS XT cranks in my garage. You’d be welcome to them for postage. Can check the length in the morning. Probably 175mm.


 
Posted : 16/07/2020 11:37 pm
 Aidy
Posts: 2977
Free Member
 

XT was Octalink, not ISIS.


 
Posted : 17/07/2020 12:07 am
Posts: 142
Full Member
 

I have a spare pair of Race Face prodigy 175mm ISIS circa 2005, not used for 10 years but look OK. Drive side has a 36 tooth ring and a DMR bash guard attached. You’re welcome to any or all of it, be good to have it used. Let me know.


 
Posted : 17/07/2020 1:25 am
Posts: 193
Free Member
Topic starter
 

Thanks all

I've messaged you Rob


 
Posted : 17/07/2020 8:57 am
Posts: 5669
Full Member
 

I’ve got a set of Truvativ FireX ISIS crank arms you can have.


 
Posted : 17/07/2020 10:54 am
Posts: 11464
Full Member
 

A compassionate person would take the opportunity to ditch ISIS and fit a bottom bracket system that works 🙂

I have some ISIS RF Turbines somewhere, a triple, if you don't get sorted.


 
Posted : 17/07/2020 12:03 pm
Posts: 193
Free Member
Topic starter
 

Thanks all

It looks like he has also killed the bb so I think we are going down the ht2 route


 
Posted : 17/07/2020 12:34 pm
 nbt
Posts: 12469
Full Member
 

I think I've got an octalink BB and crankset in the garage if you want them, James. Doing nothing so free to a good home


 
Posted : 17/07/2020 12:58 pm
Posts: 11464
Full Member
 

It looks like he has also killed the bb so I think we are going down the ht2 route

To be fair, it doesn't take much to kill an ISIS bb... he's had a lucky escape 🙂


 
Posted : 17/07/2020 1:00 pm