Who would stock them (and post me one). Photo below,
C
(its the RHS one, the LHS one is a Bontrager one that I hoped would fit but although the threaded bit is the same diameter it's a different pitch...gggrrrr
Bike Forum
[closed]
who stocks Coda (Cannondale) freehubs?
-
Posted 2 years ago #
-
I have seen them on ebay from the states occasionally.
Or try here
Local dealer with well stocked workshop you will need to phone them
or here
Posted 2 years ago # -
Thanks, I have just emailed N Ark. Wheelbase don't have an email address on their website. doh
C
Posted 2 years ago # -
I would try the phone with Noahs as they are not great with emails.
Posted 2 years ago # -
Ken Fosters in Manchester were always decent when I had a cannondale.
Posted 2 years ago # -
We've usually got Cannondale bits from Chelmer Cycles in Chelmsford. If they don't have it they can get it PDQ. Noahs are also good.
Posted 2 years ago # -
Ta, I have tried Noah's. If I don't get anywhere I will try Chelmer. It's for my roadbike btw,
C
Posted 2 years ago # -
afternoon, i got mine from edinurgh biek company, you can rebuild them with a bit of footering, i replaced the bearings and regreased mine and it is as good as new.
Posted 2 years ago #
Topic Closed
This topic has been closed to new replies.
