Overview Chat Bike Members News Women
  • This topic has 22 replies, 22 voices, and was last updated 13 years ago by Sam.
Viewing 23 posts - 1 through 23 (of 23 total)
  • Single Speeders Using Hope Pro 2's Step This Way …….
  • letmetalktomark
    Full Member

    ….. had any problems with the freehubs getting torn up even with a wide bodied cog?

    Posted 13 years ago
    MS
    Free Member

    nope…

    Posted 13 years ago
    HoratioHufnagel
    Free Member

    no

    Posted 13 years ago
    mtbfix
    Full Member

    You can get a steel free-hub as an after market thing should the need arise.

    Posted 13 years ago
    Teetosugars
    Free Member

    Not as yet..

    Seems fine here…

    😀

    Posted 13 years ago
    pjt201
    Free Member

    nope, not with my pro2 trials hub anyway 😉

    Posted 13 years ago
    clubber
    Free Member

    No

    Posted 13 years ago
    firestarter
    Free Member

    Not yet but It's early days 😉

    Posted 13 years ago
    mudmonster
    Free Member

    nein

    Posted 13 years ago
    roblerner
    Free Member

    no, but I'm too scared to check.

    Posted 13 years ago
    verses
    Full Member

    No, but I went for a wide-based cog just to be on the safe side.

    Posted 13 years ago
    AverageMark
    Free Member

    Afternoon Mark, replaced the freehub body on my Swift with a steel one, using Andel cogs from Velosolo with no problems at all. also used DX cogs with no issues.

    Posted 13 years ago
    ski
    Free Member

    roblerner – Member

    no, but I'm too scared to check.

    Same here, its on its 2nd year with a narrow cog! 😉

    Posted 13 years ago
    thomthumb
    Free Member

    no.

    Posted 13 years ago
    Haze
    Full Member

    Nope…

    Posted 13 years ago
    Rorschach
    Free Member

    Loads of miles with groove amada's with no problems.

    Posted 13 years ago
    KINGTUT
    Free Member

    Nope (well pro IIIs).

    Posted 13 years ago
    nunuboogie
    Free Member

    nope

    Posted 13 years ago
    crispedwheel
    Free Member

    no

    Posted 13 years ago
    emac65
    Free Member

    Mine got ripped to ****' pieces when I SSed my Pro 2,so bad I had to bin it !

    (It's fine really,just thought I'd say something different to everyone else 8))

    Posted 13 years ago
    cynic-al
    Free Member

    my xtrs are fine.

    Posted 13 years ago
    bigyinn
    Free Member

    Cats breath smells fishy!
    Really helpful info there ^^^ al!

    Posted 13 years ago
    Sam
    Full Member

    Jenn "The Machine" Hopkins managed to do some damage to a Hope Pro III

    Posted 13 years ago
Viewing 23 posts - 1 through 23 (of 23 total)

The topic ‘Single Speeders Using Hope Pro 2's Step This Way …….’ is closed to new replies.

Overview Chat Bike Members News Women