Anyone in Glasgow area with a crank cap to remove Raceface Cranks? stripping a frame for my mate and he has a set of Raceface Evolve DH cranks (2006). Looks like there should be a cap (or tool?) that fits in the end so you can undo the 8mm bolt against it to pull the crank off like new XTR cranks.

Have tried an octalink/square taper bb tool, and an XTR one but they don't fit, any ideas appreciated!

Isis I presume- it'll be a self-extracting crank bolt then with the outer bit missing then!

Bikelove/Craig McMartin Cycles any use?

Yep, there's a left hand threaded cap with a 10mm hex hole that goes there.
Should have the one from my knackered Evolve's in the spares bin.
I'm in Dunoon but email me yr address and I'll stick in the mail for you.

Rob

Hi Rob, thanks for that. It's a mates bike that I've stripped for him, and swapped the parts over as he's got a new frame. He's popping into bike love with it tomorrow now, so will email you afterwards if he still needs it.

Cheers 😀