ESI Silicon grips - fitting tips?

8 posts & 7 voices | Started 4 months ago by marmottefarcie | Latest reply from rickon

Tags:

No tags yet.

marmottefarcie - Member

Do any of you have any advice on how to ease the fitting and removal of ESI silicon grips?
Thanks for your help.

Posted 4 months ago #
dirtydog - Member

Just plain old water as per instructions.

Posted 4 months ago #
schmiken - Member

Window cleaner.

Posted 4 months ago #
warpcow - Member

Window cleaner here too. They were still a bit hard to get on the last few millimetres, but they been stuck solidly in place ever since.

Posted 4 months ago #
marmottefarcie - Member

Thanks for your suggestions - I'll give the window cleaner idea a try.

Posted 4 months ago #
toons - Member

Air gun to remove them and window cleaner to fit them

Posted 4 months ago #
somouk - Member

I used an airgun to fit them originally but I've found that water, window cleaner and any alcohol based solution work fine.

Posted 4 months ago #
rickon - Member

I'll add hairspray to the list, simple to fit, easy to remove - just a bit of plastic under the grip and a quick squirt of hairspray and they pop off.

Posted 4 months ago #

Reply

You must log in to post.