Evening all,

Finally gonna build up the pomp for its comuting and general road purposes. I have a set of canti’s to go on it. Front end is no problem as I have a cable stop/headset spacer. Rear end is gonna prove tricky though. I’ve got a neat little bit that can be bolted onto the frame:

But there’s nowhere to bolt this on on the wishbone stays.

Any ideas?
Cheers.
jon

Rear Cable Hanger For Cantis
http://www.on-one-shop.co.uk/cgi-bin/sh000001.pl?REFPAGE=http%3a%2f%2fwww.on-one-shop.co.uk%2f&WD=hanger%20canti&PN=Online_Catalogue_Hangers_351.html%23aBSRCH#aBSRCH

Its a hanger that fits on the seat collar bolt between the pinch flanges of the seat tube opening.

That’ll do it. Nice one. Ta very much.

Quick update and PSA.
Just taken delivery of a new white 120mm pompino for a mate.
I ordered the canti hangers (front and back) from OnOne.

http://www.on-one-shop.co.uk/cgi-bin/sh000001.pl?REFPAGE=http%3a%2f%2fwww.on-one-shop.co.uk%2f&WD=hanger%20canti&PN=Online_Catalogue_Hangers_351.html%23aBSRCH#aBSRCH

The new frames come with a new frame canti hanger fitting

so the extra one I ordered is surplus to requirement.

The front one fits on the steerer.

Hello is that 1992? This is 2009 calling….

Cheers for the update. I ended up using a Surly hanger. After trying a number of clamps I finally found that the on-one clamps have enough of a gap between them to do up tight enough before they clamp the clamp.

like this GMJ?

Stoner – it used to be the case that the larger sized pomps had a canti hanger welded on, while the smaller ones didnt. Might be useful for others to mention what size your is?

the white one is a large.

just out to the shed to photo mine/Mrs

EDIT: Right, this one is my Xtra Large 120mm pomp – 2006 in blue
Both need hangers fitting

and Mrs S Small '06

Odd, my blue pomp XL came with a welded hanger. Must be a 'rolling improvement plan' 😆

While ive got you stoner, what gear ratio do you use on yours usually? (an on your epic trip!)

Epic trip was 49:20 free (67")
Currently 49:18 free for going to the pub or down to my parents (c.10 mile trips around Malverns – a few sharp hills), occasionally 49:18 fixed. (73")
Have just fitted a 16 fixed to it to have a go at improving a poor local TT time I did the other day (82")

EDIT: our Pomps w bought as full bikes – I dont think they did many of them and Im guessing they used a different frame batch as the bikes were assembled out East I think then shipped in.

67"? Yikes!

I can just manage 70" on moderatley hilly stuff but bail to under 60" when fully loaded. Respect to MrsStoner!

guitarmanjon, in your first post you have a pic of a brake hanger. Where did you get it from? I have wanted one for ages but cannot find one anywhere.

Thanks,
Adam

adam – picture URL comes from fisheroutdoor.