Shimano TL-FC25 Equivalent?

Having just rounded mine off trying to remove a stiff BB, does anyone know of a a stronger / metal equivalent please?

What’s the BB model number?

https://www.singletrackbikes.co.uk/m8b0s370p45681/IceToolz_BB_Tool_for_BBR60_Shimano_External_Bearing_BB_/Bottom_Bracket_Tools

https://www.amazon.co.uk/BIKEHAND-Bike-Bicycle-External-Bracket/dp/B094PKDBRN

For Ultegra / XT
https://www.parktool.com/en-int/product/bottom-bracket-tool-16-notch-bbt-59-3?category=Crank+%26+Bottom+Bracket

For Dura Ace / XTR
https://www.parktool.com/en-int/product/bottom-bracket-tool-16-notch-bbt-49-3?category=Crank+%26+Bottom+Bracket

What’s the BB model number?

SM – BBR60.   Does that make a difference to the above?

SM – BBR60. Does that make a difference to the above?

The BBt59-3 (my first link) is for bbr60

A much cheaper version. I bought one by mistake but then found it fitted the Ultegra cups on my road bike.

https://www.singletrackbikes.co.uk/m8b514s370p45681/IceToolz_BB_Tool_for_BBR60_Shimano_External_Bearing_BB_/Bottom_Bracket_Tools/RS_GB

If it’s for xt/ultegra BB. The TL-FC41 for the DM chainrings also functions as a BB tool adapter.

2 tools for one if you need one. Otherwise go for a park as above.

Wiggle have a a Lifeline one too https://www.wiggle.com/p/lifeline-pro-bb-removal-tool-16-41-bbr60https://www.wiggle.com/p/lifeline-pro-bb-removal-tool-16-41-bbr60

Just out of interest, I have a Tiagra bb to fit. The only tool I have is the one I’ve used for Deore bbs; any idea if this will work?

Thanks Pjay I ordered the Pro version of the lifeline one, essentially cause it’s half price and I’ll likely only use it once.  Annoygly the super cheap lifeline BB I bought as a replacement (it’s for the turbo bike so no expensive BB wanted) comes with its own non shimano tool.  I’d better keep that somewhere safe.  

@PJay

Yes the Deore tool fits the Tiagra BBs

For threaded BSA BBs, Shimano have 3 different cup sizes so you need three different tools

BB-RS500 Tiagra//Deore/Saint – 44mm OD 16-notch cup
SM-R60 Ultegra/XT – 41mm OD 16-notch cup
BB-R9100 Dura Ace/XTR – 39mm OD 16-notch cup

chrisdw makes a good point about the XT/Ultegra Tool also being able to fit Shimano Direct Mount Chainrings but only if the tool is go through (for the axle) like the one he mentioned TL-FC41.

This is a mess. Shimano are a shadow of the market leader they once were.

@cerrado-tu-ruido that’s really useful, thank you, it is starting to get a tad complicated.