Viewing 7 posts - 1 through 7 (of 7 total)
  • nobby nic tubeless ready 26" pressures?
  • sefton
    Free Member

    whats a good pressure for a nobby nic tubeless ready (11st rider) rigid HT.

    I always run them quite high but think a lower psi might help with comfort being rigid

    cheers

    br
    Free Member

    25psi

    sefton
    Free Member

    front & rear?

    I’ve been running around 40rear & 35front 😯

    mulv1976
    Free Member

    I’ve been running around 40rear & 35front

    That is quite high for tubeless. For me around 28 seems to be the sweet spot – find them a bit ‘squirmy’ lower than that, especially when it’s wet. I’m about a stone heavier tho.

    sefton
    Free Member

    28 front & back?

    riding around malham tarn 25m race

    mulv1976
    Free Member

    It depends on conditions. If wet I’ll run 28 front and back. Dry 28 front 25 back. Might seem small but I can definitely feel the difference.

    I used to run these – I now use high rollers @ 25 all year round

    mokl
    Free Member

    I run one on the front, weigh 11 stone and inflate it to approx 22 psi. Ralph at the back I run at around 25 psi. On harder surfaces I can feel them squirm a bit leaning into fast corners so occasionally run them a bit firmer depending on where I’m riding.

Viewing 7 posts - 1 through 7 (of 7 total)

The topic ‘nobby nic tubeless ready 26" pressures?’ is closed to new replies.