[Closed] Help me find the perfect sub £1000 retro motorbike - pics please

Honda 400/4

Cute. Still available around £1k?

Bikes have come on awfully long way since the 80's.
They really were a bit crap back then.

Old Guzzi's are nice if you like tractors.
Old Harleys are horrible, even if you like tractors.
Avoid bevel drive Ducatis and anything British.

Modern retros are great. Old bikes were pretty crap until the mid 80's, tbh.

A Suzuki GS850 might suit, but they're ugly and a bit bland.

650 Katana would be good, tough motor, shaft.
Spares might be hard to find.
GPZ900 or FZ750 would be nice, but might be a bit modern for your taste?

[url= http://www.ebay.co.uk/itm/1984-SUZUKI-GS-650-KATANA-UK-BIKE/252427710380?_trksid=p2047675.c100012.m1985&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D35391%26meid%3D2920bec6701f4c2fb1264005b114426b%26pid%3D100012%26rk%3D20%26rkt%3D20%26sd%3D191396852182 ]Katana[/url]

I would say 70s Honda are simple and pretty bulletproof.

Apart from the cam chains, obviously. 🙂
Wonder if Tony Gallea's still about?

I'm sure they've all been replaced now and have decent tensioners.
A CB750 might be doable on a budget?

I'm going to go for a Suzuki gs, never had one but some bloke near me ride one and it looks quite nice, or. Kawasaki z z I've a gt 550 kwaker not really cool in any way but in a certain light looks ok. A gpz900 is one of my dream bikes. Old guzzis spew oil in my experience. Or just get a W650

Air cooled would be nice. Belt or shaft drive appeals. But as long as it's a strong engine and looks the part I'm not looking for ballistic pace

I like my 'old school' motorcycles & can think of a few I'd recommend.
The problem is non of them are sub £1000...
Have a look for Honda CB750/900,kawasaki Z1000/GPZ750/1100,Suzuki GS750/1000.
From the 80's you've got Honda VFR750,kawasaki ZZR600/ZZR1100
IF you can find one in good order for that kind of money.
I know it's a lot larger than 800cc but in your position I'd pay SLIGHTLY more & get a Yamaha XJR1300,have a look on Ebay.They're a steal at the moment
^^Up there it says'they're a steal at the moment' but this website's playing up again..

I did used to fancy a ZZR but I think I'm more keen on a naked look now, and air cooled. I'm hoping I can source a runner that I can tinker with.

Early GS750s look nice

Yamaha Virago?

Whimper

http://www.ebay.co.uk/itm/322171808082

[img] [/img]

A 400/4 for a grand will be a money pit and not really suited to 2 up. If you can bear how it looks there's always the diversion....

Or bandit 600

Here's my 80's aircooled XT600.You won't get a decent one for less than a grand..
[URL= http://i631.photobucket.com/albums/uu38/MarkF-XT/PICOS%202010/PICOS-XT15-WEB.jp g" target="_blank">http://i631.photobucket.com/albums/uu38/MarkF-XT/PICOS%202010/PICOS-XT15-WEB.jp g"/> [/IMG][/URL]

My Dad had a GS850G with a Neta pipe, it sounded lovely. Once I was old enough he let me ride it. It was shaft drive and would be perfect for what you want.

XJ550- I've had a couple of these and they're a hoot. We made a street tracker out of one (here it is part way through)-

[IMG] [/IMG]

and a cafe racery thing out of the other 😀 For shaft-drive, what about an XJ650? They're still sub-£1000 if you look outside of ebay.

Or for total brain-out, license-threatening value for money what about an FZR1000 Genesis? They're neither air cooled or shaft drive but they are bloody fast. We had one called The Yamasaurus 😆

Apologies for my previous post I was quite spannered when I wrote it so it is a bit poor. I have a gt550 nice bikes reliable comfy for a six footer, not the fastest or prettiest, but an ok bit of kit and can still be got cheap. The problem with a lot of seventies eighties bikes is they now go for silly money especially with the current custom trend which has moved from coppers to bobbers street racers (people customising Honda cx500s!) etc and people reliving the bikes of their youth. A bandit would be a good shout, we had both for work and the big one was nicer than the six hundred.
The small ads in classic motorcycle mechanic magazine will give you a good idea of what's about and for how much. If you could loose the naked criteria I would suggest an fj1200, great bikes still go for reasonable money and I think they are quite stylish

What forums would you recommend for ads? MCN is a bit thin on the ground. Others seem to have mainly very old British classics.

I kinda like the GT550s. Boxy and very 80s looking, fugly in a good way?

XJ550- I've had a couple of these and they're a hoot

The only bike I've owned from new,the bike that started my love affair with Yamaha's.Also the only bike apart from my XT600 that I never managed to throw down the road,actually I take that back,the XT's been down the road,but it was snowing...
The trouble with any bike of this age is that you're more than likely going to have to remedy previous owners bodges & it can quickly turn into a money pit.

As long as it's easy enough to strip down and fix I have no problem with some tinkering. In fact, I'd quite like to do a full strip down and rebuild at some point. But initial roadworthyness would be a bonus.

XJ550s look really nice. Not that many around though it would seem

How about an 80s Kawasaki? I had a GPZ600r which was magic, and the GPZ550 is classic 80s fugliness. Both readily available for under a grand. There's a GPZ600r on eBay at the moment for a couple of hundred, needs carbs tuning and a brake bleed, but for the price could be a right bargain.

As long as it's easy enough to strip down and fix I have no problem with some tinkering.

I remember my older brother had a Yamaha XS500 in the mid-70's, he used to pay me a couple of quid to clean and autosol solvol it each week, there was a lot of chrome.

Absolutely no idea how it rode though.

Never been a true motorbike fan myself, however I did used to like the old GPZ's and a soft spot for the Guzzi Le Mans.

This is near Epsom.
[img] [/img]

[url= https://c2.staticflickr.com/9/8574/16655437601_a31038a899_z.jp g" target="_blank">https://c2.staticflickr.com/9/8574/16655437601_a31038a899_z.jp g"/> [/img][/url]
I bought this 80's Honda XLV750R trail bike for £900, air/oil cooled V twin shaft drive, Honda reliability, comfy & nice to ride. Pretty rare though and prices seem to be creeping up over budget now.
Honda do more modern versions of retro classics like the 400 CL's and CB's, much improved lights/brakes/running gear etc compared to 70/80's. There's a place in Reading and another in Brighton advertising these imports, never been to them but have really nice looking modern retro bikes advertised.

[url= http://www.oldbikemart.co.uk/ ]OBM can be useful[/url]

As Busta says,if you have not done this kinda thing before it can soon get spendy,then you wish you had spent a bit more at the start so you could be out riding more.

What about a BMW R65LS or similar?

The problem with the thread title is the sub £1000 requirement.
There must be some bargains out there but it's finding them & as soon as you start working on 'projects' things get expensive even when you know what your doing.
Just to put things in perspective,that XT600 up there stands me at over £3000,yet I only paid £675 for it..
My FZ750 needed the shims doing the other year,I think it cost me over £70 just for the shims,20 valve head & I could only swap a few of them.I shudder to think what the labour would have cost for a shop to do the work 😯

As long as it's easy enough to strip down and fix I have no problem with some tinkering. In fact, I'd quite like to do a full strip down and rebuild at some point. But initial roadworthyness would be a bonus.

I used to run a GPz550 as a courier bike, to be honest, shimming the valves on the air-cooled 550 Kawasaki motors was a bit of a pain in the backside - you have to remove and reinstall the cams to do it and juggle shims etc. The GT was a bit uninspiring, if effective.

I used to test bikes for a motorcycle mag back then, but nothing much really jumps out at me fitting your remit, though I always had a soft spot for the Yamaha TDM 850 as an all-rounder. It's quite a big bike as well. Main downside, from memory, is that the gearbox was pretty crashy just like the Super Tenere.

If you want shaft drive, there's always the V-Max 😉

Old BMW Boxers - the GS ones in particular - are oddly amusing as well.

Any good reasons not to buy a CB750?

Someone above mentioned an importer in Brighton, I've been meaning to check them out for a while. They have a few CB400 NC36's in stock straight off the boat. Now that's a smart looking bike, good blend of old and new tech. Alas, way out of my price range

Another vote for a Honda, been using this one lately, FX650 single, bought for £800. Not in the 70/80's category though, it's 2001, kind of retro looking I guess. Been reliable and goes well so far.
[url= https://c6.staticflickr.com/8/7668/27979442461_47523bd98a_z.jp g" target="_blank">https://c6.staticflickr.com/8/7668/27979442461_47523bd98a_z.jp g"/> [/img][/url]

The thing with older Yams (and Suzukis I think) is that loads of later 80s and 90s parts fit them, almost like Lego!

The more I read the more off putting it becomes. It would appear that most 70s bikes spend more time being fixed than ridden - and that's according to competent mechanics!

Aren't there any genuine super reliable retro classics that a spanner monkey is able to maintain?

70s bikes were shit 40 years ago. They haven't improved with age. Things didn't really improve until the mid-90s, but even then you're looking at 20 year old bike.

I bought this 80's Honda XLV750R trail bike for £900, air/oil cooled V twin shaft drive, Honda reliability,

You must have the only one that hasn't eaten it's gearbox and camshafts!

XJ 650 or possibly a Z650 but one for under a grand will be horrible.

You're buying a bike that's between 36 & 46 years old.
This means you're buying a bike that's probably had multiple owners & been subject to various amounts of abuse & neglect over the years/decades.Of course you might drop on a cherished bike that's been pampered & looked after,never seen rain etc.but I doubt you'd get that for a grand!
It's a bit of a minefield,good luck,

Z650 but one for under a grand will be horrible.

The more I read the more off putting it becomes. It would appear that most 70s bikes spend more time being fixed than ridden - and that's according to competent mechanics!

Aren't there any genuine super reliable retro classics that a spanner monkey is able to maintain?

The thing is, right, is most bikes that age have been under the 'care' of at least one person who shouldn't be allowed near tools. I can personally guarantee a wood screw or self-tapper holding a piece of bodywork on and a bullet/spade connector or two as well. Once they're put right and are maintained right there's no reason why they shouldn't be as reliable as anything else. Balls to anything with points though 😆

edit- whatever you go to look at make sure that you're starting it from stone cold and get a test ride to get it properly warmed through, then try to restart it hot.

at £1k you could be buying a bike that you suddenly need to spend £500 on without wanting to

You sure you can't up your budget a bit more and get something a bit newer?

You sure you can't up your budget a bit more and get something a bit newer?

I see the one side of the discussion where all these bikes are now 30-40 years old, will have seen neglect, wear and tear etc - but on the other hand, you also hear of 'bullet proof/rock solid' reliability claims, and some of the less complicated engine designs have about a thousand less moving parts than their counterparts.

I was thinking that a 500/600cc aircooled machine would be a safer bet. I've been reading horror stories about valve shims and adjustments etc though.

Aren't there any 'go to' reliable models?

I've been recommended a Honda CX500 or GL500 (same 500cc twin) as a reliable old work horse. Gotta say, I think its a handsome looking machine:

[URL= http://i968.photobucket.com/albums/ae168/keepitsteel/Honda%20CX500_zps2pmyt3oe.jp g" target="_blank">http://i968.photobucket.com/albums/ae168/keepitsteel/Honda%20CX500_zps2pmyt3oe.jp g"/> [/IMG][/URL]

[URL= http://i968.photobucket.com/albums/ae168/keepitsteel/Honda%20GL500_zpsuxwrlsvf.jp g" target="_blank">http://i968.photobucket.com/albums/ae168/keepitsteel/Honda%20GL500_zpsuxwrlsvf.jp g"/> [/IMG][/URL]

The plastic maggot had an appalling reputation for reliability and is the ugliest bike ever made. They did wheelie quite well though. Which might explain how quickly I killed mine.

The mighty maggot is now becoming very popular with the hipster custom crowd as they make nice brat bikes so good luck finding a reasonable one for a grand.

Even Superdreams fetch silly money now too.

Suzuki GS500E (The twin not the four) might be a shout - find one that hasn't been dispatched to death or been at a training school though.

Ha, the maggot looks fine to me - i've always preferred my vehicles a bit 'different'.

appalling reputation for reliability

Everything i've read claims the complete opposite. ~Asides an early camchain tensioner issue that seems to have been rectified fairly quickly.

Suzuki GS500E

Everything i've read claims the complete opposite. ~Asides an early camchain tensioner issue that seems to have been rectified fairly quickly.

Not that you'll get one for a grand.

The CX was a good bike I had three. The original CX-Z got through two cam chain tensioners very quickly but the third one stayed fixed I did 20k+ on it nothing else failed but the corrosion was apocalyptic.

2nd bike was a 500E much easier on the eye whilst still being a Honda

3rd one was a 650E which was never quite the same after a crash

What about a Honda nighthawk still affordable and I remember reading that they weren't too bad

A Suzuki air-cooled four. GS1000 or GSX1100 will be out of budget, as will, I imagine the 750. 850 shafty was a nice tourer in it's day, but the 550/650 engines were bulletproof. Easy to work on. Cdi, not points. 2 valves per cylinder. Great handling (for their day :lol:)
650 engine was a later and better design, strengthened for the XN85 Turbo, with shaft drive.
550 chain driven and pretty anaemic, but handled well enough to make it a decent prod racer in it's day.
Ideal compromise between performance, pizzazz and reliability would probably be a 650 Katana, but I suspect these will be out of budget.

Is this [i]really[/i] the era of retro you want to get into. Because, as so succinctly said above, even though these bikes are really early 80's numbers, this still applies:

70s bikes were shit 40 years ago. They haven't improved with age. Things didn't really improve until the mid-90s

I've been recommended a Honda CX500 or GL500 (same 500cc twin) as a reliable old work horse. Gotta say, I think its a handsome looking machine:

BWD's post reminded me I had the 'road' version of the TDM

[img] [/img]

Not the era you're looking for or under £1000, but what a fab bike for tootling around on, really comfy - even two up for a bit anyway, enough power from a lovely twin, only 5 speed but after you were moving it had enough torque to basically stick it in top and cruise about.

I want another one now. Sorry, as you were 😉

I was thinking that a 500/600cc aircooled machine would be a safer bet. I've been reading horror stories about valve shims and adjustments etc though.

Aren't there any 'go to' reliable models?

Problem is you're buying about 30 years after couriers and instructors/schools will have run anything like that into the ground.

Plenty of bikes will do 100,000 miles, if you service them, but that's 10 years of 'normal' use. Spread over 40 years you're buying a bike that's been used intermittently, probably missed as many services as it's had, and anything rubber/plastic is probably falling apart.

For context, plenty of people* will say a Harley Davidson will do 200,000miles before it's uneconomical to repair, and even then someone will probably still do it, which is why 15 year old Dyna's with 50,000 on the clock are still £6k, and that's the cheapest Harley you'll find apart from Sportsters (and even a rubbish Sportster is £3k).

*They may or may not be wrong. I'd argue the tolerances are so slack it's just harder to work out when they're worn.

Vinnyeh - which models are the 650 engine found in? Shaft drive appeals, chains are a pita

Chains are easy to work on and replace. Add a scott oiler and they're virtually maintenance free. I did 25k on a chain with barely any wear.

Given the choice, i'd pick shaft still. Less mess being chucked about, less hassle post riding in rain etc.

But yes, not a dealbreaker.

My uncle has stockpile a bunch of GT750's , Z1000 and Z1300's. Im tempted to break the bank and go for one of those.
Would just prefer an easier life! (not sure he's ever had them on the road for more than a week at a time).

So my uncle has offered me a Z1300 for £1800. He lives out of the country at the moment though, and doesnt know what it needs to get running again.

He has a lock up with various American muscle cars and 70s/80s superbikes in various states of repair. In fact he's the reason I have an incling for older bikes - he has about 5 GT750's, including one minter with about 4000 miles from new,

I remember seeing the Z1300 a few years ago and it was an impressive looking bike. In great cosmetic shape too. Seems they dont sell for much less than £5k these days.
Worth considering?

Why not just get something slightly more modern and enjoy riding it ?

Edited to add, Bandit 1200 ?

Yeah, had a Bandit 1200 a few years ago. Stonking engine.
I think this time round im after the full musty garage, leather jacket and open face helmet experience.

That just doesn't work with a Bandit.

[url= http://www.realclassic.co.uk/kawa03110100.html ]Z1300 review[/url]

Z1300 is a big lump of a thing

I remember seeing the Z1300 a few years ago and it was an impressive looking bike. In great cosmetic shape too. Seems they dont sell for much less than £5k these days.
Worth considering?

Our state of the art workshop! Building a 13 from the crate.
My ts50 behind.
[img] [/img]
Does anyone remember Doug Domokos?
[img] [/img]

Does anyone remember Doug Domokos

The plastic maggot got so much flak from the power ranger crowd, but for courier riders it was almost the bike du jour, not too much bodywork to get smashed, what was there was easy to duct tape together, a reliable engine and drive-train if kept maintained, (shaft-drive, so no chain oiling), and it's possible to make an interesting and fun retro-styled bike that's perfect for scratting around the A-and-B roads.
If I was looking at getting a bike, I'd seriously look at a maggot.

[img] [/img]
[img] [/img]
[img] [/img]

There's always the turbo version...

[img] [/img]

The Honda CB750KZ is a fine bike, my brother has one, it was his first bike after he passed his test, going from a CB125/250 as soon as he was legally old enough to ride. The 750KZ has a four-into-one pipe on it, which takes a lot of weight off, and updated shocks. I was with him on the bike when he went up the the Bike Show at the NEC Birmingham, he bought a pair of shocks at the show, swapped them over in the car park, and rode back with the new ones, made a noticeable improvement to the handling, too.
The pipe has 'For Racing Use Only' stamped on it, but it been on the bike since the mid-80's, (the bike is 'W'-reg - 1980), and nobody's ever had an issue with it.
It is pretty loud,

[img] [/img]

Get yee an FJ1200 , 70's bikes really do suck , if the shit brakes dont kill you the shit suspension will , never mind the tyre's, although that cafe racer red magot is sexy & horrible all at the same time.

Why anyone would dress up a maggot like a guzzi is beyond me. Actually a Moto guzzi might be an option. You can get newer ones cheap. Probably just as crap as a 70s bike too 🙂

Get the Z1300!

Maggots were great, but as a shortarse, I always found them a bit tiptoey.

XJ650's are lovely things, but I've not seen one in ages.

My favourite bikes back then as a skint newbie were the Honda CB250RS, gorgeous little thing, but there's none left.
No idea how a simple 250 single can be so much fun.

Oh, and MZ's. 😳
I have a bit of a thing for them.
As kids we had one in desert camo with a shopping trolley converted into a side car.
I'd love another one.

If you want something cool, simple and a bit of fun get an ETZ 250. Not going to set the world on fire. Nice and light comparatively so you can throw it around, still has a decent power band. The racing club do loads of aftermarket bits for them such as expansion chambers. There are sites from over the channel offering ridiculously cheap spares and it just screams it be made into a cafe racer with a set of ace bars or clip ons.

I think by getting an older two stroke you get all the nostalgia, sometimes the prices can be premium but if you look around there are bikes to be had. I'm desperate to build an old 70s 2stoke flat/street tracker from some of the Mx spares we have.

Hmm, that does look an interesting option. I imagine it would rattle ones fillings clean out, but it certainly has a charm

My favourite bikes back then as a skint newbie were the Honda CB250RS, gorgeous little thing, but there's none left.
No idea how a simple 250 single can be so much fun.

although that cafe racer red magot is sexy & horrible all at the same time.

[img] [/img]

I have to say I [i]love[/i] this bike!
https://motorfans.nl/lifestyle/custom-motoren/raceklaar-custom-honda-cx500-caferacer/
I think the budget might be busted with this one, though...

£1,000 is going to need a lot of luck to get anything decent.

£2,000 can get you a BMW which are bikes that tend be looked after, so often still in good nick. Parts are easy too.

My rule of thumb when I was an impecunious youth was always to buy old men's bikes. Rarely thrashed, always looked after, and usually came with a load of spare parts.

Since being recommended i've been drawn to these strange agricultural MZ's...

Who has any experience of them? I'm sure they are super vibey, noisy and supremely unrefined - but a bit of cold war era Eastern bloc machinery appeals on a 'so bad its good' level!

Is there much to choose between the 250 and 300cc models? First glance shows that some come fitted with oil mix feed into the cylinder (or carb?) - is this only on a partiuclar model?

I'm sure it'd be crap for touring but would be fine for pinging into town on. And seemingly cheap as cabbage soup.

I will shortly be selling my 1989 Yamaha XT600Z Tenere, can't upload photos as I'm at work but here's one for reference
[img] [/img]
Fully restored by previous owner, selling for a figure very close to your budget.

Well I happen to think they are pretty sweet. Talk to me.

I had a couple of 125's and the reg/rec was a weakpoint. Also the oil pump failed so ended up bodging back to pre-mix.

They're bloody heavy, the suspension is soft and longish travel, the front disc is quite good, vibration isn't too bad and they don't sound like an RD or TZ as they're tuned for torque rather than revs. The centre stand lug welds are a weak point so if they're corroded they'll need welding.

The only one I ever liked the look of was this one [img] [/img]

I suspect he spent more than a grand on it though.

Plenty of good resources out there as there's plenty of other [s]mentalists[/s] fans out there [url= http://www.jetblackjelly.com/MZ/links.htm ]EG[/url]

That Tenére's nice, which has just reminded me of another similar bike I was tempted by a few years back, the Honda 650 Dominator:

[img] [/img]

This post reminds me of a comment my Dad made a fair few years ago when looking at a restored 1930's BSA.

"I had one of those in the 50's, they were crap in their day and crap in my day; I'd hate to imagine how crap it feels now"

And for what it's worth, MZ's were serious crap and not a patch on Jap bikes even in the 70's/80's.

If you want some more details about the Tenere i'll find some photos and email you.

Restored by previous owner shortly before I bought it (have all the receipts), I rode it for a year before new baby and major house restoration relegated it to the shed. Now its getting a spring clean, new tires, brake and fork overhaul and likely a new chain ready for sale.

It a great bike, small/light enough for nipping around town and a bit of gentle green laning (I've only ventured onto a few tame county roads) but has the legs to cruise on A roads. Sounds great in my opinion. Has reasonable weather and wind protection and is comfortable to ride for long distances as its a little taller than the average. Has usable lights. Big tank to so no constantly filling it up!

I would not be selling however the previously mentioned house renovation needs finishing and I also need to fund some equipment to start frame building.

Hoping for £1100 ono

Let me know and i'll sort you some more details

By all means, would be great to see some pics. I'll get in touch regarding a chat about it on strength of pics.

I had an MZ 251. Rode it to Oporto (from Bristol) with camping gear and a bodyboard. Came back and worked as a despatch rider on it for 18 months. Then got a company Honda Bros 400 (great bike).

Cheap and simple to mend. I'm not nostalgic about it.