MegaSack DRAW - This year's winner is user - rgwb
We will be in touch
boring question, but how can i stop the head on my new mattock stop slipping down the handle? It is a wooden handle... Do i need to drive something into the top to expand the wood?
Cheers
Yep - should be able to buy a wedge at any decent hardware store
Or put the wedge between the mattock blade ring and the wood. If you can't get to a hardware shop, make your own wedges
Is it one of those B&Q ones you got? [url= http://www.get-digging.co.uk/ ]These[/url] ones are much better tools to use and last infinitely longer if you get the chance to get one instead.
the one i bought was from tool station. It seems to be preety good quality, but those azada's do look good. but they cost nearly twice as much...
Try holding the end of the handle and dropping the head end onto hard ground a few times. Bit counter intuitive but it drives the head onto the taper harder.
Or leave the head end in water for a few hours - it makes the wood swell.
Yeah, i got it to stay on for a while by jumping up and down on the end, but it did come loose. I'll try the water approach when i go up the trails in a minute, then try to get a wedge long term...
glasgowdan - Member
............. These ones are much better tools to use and last infinitely longer if you get the chance to get one instead.
thanks i've got one of these, must be at least 30-40 years old,
my grandmother owned it originally,
anyway the thing is i've never know what it was called,
im gonna get me another
all i need to know now is how to pronounce azada 😀
edit; oh yeah what swamp_boy said, it shouldn't need a wedge or shim
It's be coming loose if the taper is different on the shaft and head.
if possible trim so they're more alike, and the water trick works well, keep things moist and the head will remain stiffer on the shaft.