How do I make my De...
 

MegaSack DRAW - This year's winner is user - rgwb
We will be in touch

[Closed] How do I make my Desktop PC wireless?

8 Posts
7 Users
0 Reactions
80 Views
Posts: 0
Free Member
Topic starter
 

We have a wireless router which the laptop and PS3 run off of, we also have a desktop that is too far away from the router. What do I need to buy to make the desktop talk to the router?


 
Posted : 02/04/2010 5:14 pm
Posts: 23298
Free Member
 

USB wireless adaptor or install a PCI wireless card.


 
Posted : 02/04/2010 5:15 pm
Posts: 0
Free Member
Posts: 23298
Free Member
 

as long as you have a spare PCI slot and don't mind opening your PC up.


 
Posted : 02/04/2010 5:28 pm
Posts: 4892
Full Member
 

take it out from under the desk

turn it round

pull all the wires out and bin 'em

ta da!! it's now wireless

.
.
.
.
.
.
.
.
.
.
.
.
or you could just buy one of these
[url= http://www.dabs.com/products/netgear-wg311-54-mbps-wireless-pci-adapter---network-adapter-2NYG.html ]http://www.dabs.com/products/netgear-wg311-54-mbps-wireless-pci-adapter---network-adapter-2NYG.html[/url]


 
Posted : 02/04/2010 5:52 pm
Posts: 0
Free Member
 

I just use a USB wireless dongle - dead easy ( does use one USB slot though which can be a pain)


 
Posted : 02/04/2010 6:13 pm
Posts: 19
Free Member
 

Firstly what type of router are you using this will either be an 802.11n or g.

n good / g ok

if you have n then you might as well get a card or USB that supports this both will work, n is quicker.

Then make sure whatever you get USB or card works with your os, loads of older USB sticks don't work with windows 7....


 
Posted : 02/04/2010 6:42 pm
Posts: 2
Free Member
 

Just remember that USB wireless is heavier than inbuilt wireless so the PC has to be higher up than the router otherwise all the wireless bits run down the stairs and collect in the corner.


 
Posted : 02/04/2010 8:41 pm
 DezB
Posts: 54367
Free Member
 

what mastiles_fanywossisname said - http://www.wirelessdongle.co.uk/


 
Posted : 02/04/2010 8:48 pm