What's the bes...
 

[Closed] What's the best portable power washer ?

Posts: 263
Free Member
Topic starter
 

I'm in need of a portable power washer, needs to be able to be run from a 12v socket in a car or from the mains at home. Needs to have a sizable water reservoir, enough water and powerful enough for a thorough bike clean and I need to be able to fill it up from a tap in the sink or bath as I don't have an outside tap or hosepipe at the moment.
Dirtworker ? Nomad ? Mobi ?

What's the consensus folks ?
TIA


 
Posted : 21/01/2017 6:17 am
Posts: 0
Free Member
 

Can't really comment on the new stuff, but I have an original dirt worker that I got second hand about 6 years ago and that is still going strong, so much so that I had a couple of guys at cwmcarn the other weekend, ask me what it was and where they could get one


 
Posted : 21/01/2017 9:06 am
Posts: 4972
Full Member
 

One of these off eBay a water container of your choice and a 12/240 plug adapter for home use .

http://www.ebay.co.uk/itm/272248133915?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT


 
Posted : 21/01/2017 9:20 am
Posts: 3
Full Member
 

I've got a nomad runs off 12v or internal battery. Been really good when I've used it. Reservoir big enough for 2 bikes.

Barely use it so could be tempted to sell......


 
Posted : 21/01/2017 9:24 am
Posts: 23309
Full Member
 

What's the best portable power washer ?

I haven't tried all of them, but I've got an Airace Waterman that does the job and has done for the last 3 years. The fuse cover fell off the adaptor though and a threw it away because I didn't know what it was*. I had to buy another off ebay for a couple of quid and bodge it.

19 Litre reservoir is good enough for 6 muddy bikes**.

One online review moaned that it was heavy when full of water, so if you put 19 L in it the weight will be the mass of the unit + 19kg.

*I am a knob.

**In my experience. Different levels of mud adhesion and quantity will influence the results.


 
Posted : 21/01/2017 9:42 am
Posts: 263
Free Member
Topic starter
 

@michaelbowden, have PM'd you


 
Posted : 22/01/2017 2:38 am