What second wheelse...
 

[Closed] What second wheelset to go with Mason x Hunt 4 Seasons (road + gravel)

Posts: 726
Full Member
Topic starter
 

Firstly apologies for yet another 'what wheelset question'

For my Secan I currently have a pair of Mason x Hunt 4 Seasons and switch between WTB Riddlers which I'm soon going to replace with WTB Resolutes) and Vittoria Corsa Controls for when I'm heading out for a longer faster road/club rides (when they return).

The downside of this is not being able to run them tubeless so I'm looking to get another wheelset, budget around £500 but potentially more if it's a particularly good option.

The question is, am I best:
1. buying a wheelset with a wider internal width than the 4 Seasons (they're 19mm internal) setting the Resolutes tubeless up on them and putting the Corsas on the 4 Seasons? If so, any recommendations for that? The Hunt Gravel X Wides look decent but not available til mid June, JRA Monitors look alright too (been following this thread https://singletrackworld.com/forum/topic/700c-29-wheels-for-road-and-light-off-road/ )

2. buying another set of the Mason x Hunt 4 Seasons and having one set up tubeless for gravel and one for road. They're pretty light and this should also reduce faffing about with realigning calipers etc.

3. buying a decent set of more road-oriented wheels for the Corsas and set the Resolutes up tubeless on the 4 Seasons. Quite like the look of the Hunt 34 Aero Wide Disc, or splash out a bit more on some carbon numbers like the 40mm JRA Mahi Mahis or Hunt Carbon All-roads

4. Oooorr, not spend nearly as much money and ditch both tyres for a set of something in between, like Gravelking SKs and set them up tubeless.


 
Posted : 18/03/2021 6:32 pm
Posts: 953
Free Member
 

I'll provide my standard, weekly answer to this standard, weekly question 😉

Strada All Season - DT 22m rims, Miche hubs. Brilliant, hand-built wheels.


 
Posted : 18/03/2021 6:40 pm
Posts: 1442
Free Member
 

have a set of wheels that would suit.
from Martin at Arkane https://arkanewheelworks.co.uk
he uses hope/DT/King on a variety of hubs, he built me a set of carbon 38 deep and 30 wide with pillar spokes using his own hubs (ezo bearings and better than bitex etc) for £660

really pleased with them, fine for road with a 28/30 tyre but will do gravel if my needs change.


 
Posted : 18/03/2021 6:56 pm
 P20
Posts: 4252
Full Member
 

I’d prefer a matching pair in attempt to minimise faffing when switching between the two


 
Posted : 18/03/2021 7:43 pm