Topic starter
As above. Should I just get the SRAM ones for £16 on CRC, or are there better options out there?
Posted : 25/01/2011 6:44 pm
UK Bikestore had some , either KCNC or BBB , for about £10
Apparently you can buy just the bearings on ebay for £1 if you have a [s]brick[/s]press.
Posted : 25/01/2011 7:48 pm
X7 jockey wheels work fine in x9 mechs
Posted : 25/01/2011 7:54 pm
I used BBB rollerboys, last really well.
Posted : 25/01/2011 9:21 pm
Depends which X9 mech - if the wrong 'one', only SRAM it seems.
Posted : 25/01/2011 9:26 pm
Topic starter
2009 mech (well at least it's from a 2009 Cannondale Prophet).
Posted : 25/01/2011 11:10 pm
Topic starter
The BBB rollerboys look like they have better bushings / bearings than the SRAM replacements. Does anyone know if they'll fit the 2009 mech?
Posted : 26/01/2011 1:27 pm
Yes they do.
Posted : 26/01/2011 1:34 pm
Topic starter
Thanks folks, I'll give them a try.
Posted : 26/01/2011 1:43 pm